Cooper Lighting RL460WH830PK Halo® Recessed Mount RL4-Series 4 Inch LED Retrofit Module; 10.5 Watt, 600 Lumens, Matte White
|•||Dimension: 4 Inch Length x 4 Inch Width x 3 Inch Height|
|•||AIR-TITE™ certified per ASTM-E283|
|•||-30 degrees Celsius minimum starting temperature, 25 degrees Celcius maximum IC (Insulated Ceiling) ambient continuous operating temperature, 40 degrees Celsius maximum Non-IC ambient continuous operating temperature|
|•||Listed for wet and damp locations|
Cooper Lighting Halo® Retrofit LED baffle-trim module in matte white paint finish is used for 4-inch aperture recessed down lights. It includes LED, heat sink, reflector, lens, baffle, and trim ring. It is provided with a die-cast aluminum construction for better durability. The heat sink is provided to take heat away from the LED and keep temperatures below specified limits. It has an E26 medium screw-base Edison adapter that gives easy retrofit of incandescent housings. It features impact-resistant polycarbonate regressed lens in convex form for lamp-like appearance. Module with high lumen transmission provides uniform illumination and diffusion.
Module is provided with precision-formed spring blades that secure to compatible housings. Blade in friction design permits the module to be placed in any position within the housing aperture. It is provided with a separate grounding cable for attachment to the housing during installation. It is engineered with a dimming capability of 15% in normal operation with standard 120 Volt LED-rated electronic low voltage and many incandescent dimmers. It also dims to 5% nominal using dimmers with low-end trim adjustment.
The module can withstand a color temperature of 3000 K and has color-rendering index of 80. The LED chip consisting of a multiple LED package with proximity phosphor coating is mounted on board designed to form a one virtual white light source. It provides a brightness of 600 lumens and 57 lumens/watt. This module has an LED connector that forms good non-screw base luminaire disconnect for fast and easy installation. Connector meets the California Title-24 high-efficacy luminaire requirement for a non-screw base socket.
Module is featured with a 120 Volt, high efficiency electronic dimmable driver that delivers DC power to the LED. Driver has a power factor greater than 0.90 and THD less than 20%. It is provided with an integral thermal protection in the event of extreme temperatures or any internal failure. Driver is mounted externally for future replacement. Driver meets FCC EMI/RFI Consumer Level limits for use in residential and commercial installations. Module is UL/cUL listed.
|Amperage Rating||0.15 Amp|
|Application||For Use In Insulated Ceiling And Non-Insulated Ceiling Rated Housings, 4 Inch LED Housings New Construction And Remodel|
|Color||White Inside, Ansi 61 Gray Outside|
|Cover Type||Continuous Hinge With Removable Pin, Door Closing Mechanism Cutout, Operating Handle Cutout, Operating Mechanism Cutout|
|Driver Type||Dimmable LED|
|Finish||Polyester Urethane Powder Coated Over Phosphatized Surface|
|Frequency Rating||50/60 Hz|
|Item||4 Inch Retrofit|
|Lamp Type||3000K 80 CRI 600 Lumens 57 Lumens Per Watt Integrated Dimmable LED|
|Material Specification||14 Gauge|
|Mfr/Vendor||Eaton / Cooper Lighting|
|Product Type||Electrical Enclosure|
|Standards||UL And cUL 1598, Energy Star Certified, RoHS Compliant, IECC Compliant, WSEC Compliant, Title 24 Compliant, UL60950-1, UL8750, FCC Title 47 CFR, Part 15, Class B (Consumer) EMI/RFI, Class A Sound Rating, IP65 Rated|
|Voltage Rating||120 Volt|
|description||The Halo RL4 series is a retrofit LED Baffle-Trim Module for 4" aperture recessed downlights. The RL4 is designed for use with compatible 4" housings. The RL4 integral LED driver is dimmable at 120 volts. The RL4 lens provides uniform illumination and wet location listing. The RL4 die-cast construction makes any housing AIR-TITE for added HVAC savings and code compliance.|
|feature#1||Flexible mounting with friction blades|
|feature#3||3000K pure white light|
|feature#4||Rated for IC, ICAT and may be used in Non-IC housings|
|feature#5||Damp and wet location listed (shower rated)|
|feature#6||Five-year limited warranty|