Leviton 4100P9W Watertight Pin and Sleeve Plug; 100 Amp, 250 Volt AC, 3-Pole, 4-Wire, 3 Phase, Screw Terminal, Blue
|•||Size: 5 Inch Dia x 12.300 Inch Length|
|•||Certified for current interrupting at full rated current|
Leviton 3-Pole 4-Wire 3-Phase Pin and sleeve plug in blue color is made of heat/chemical resistant Valox 357 that provides electrical properties with good process ability and surface appearance. It has locking ring, external cord clamp assembly and gland cap that are made of Valox 357. It features abrasion resistant chloroprene grommet/gasket, impact resistant nylon contact carrier, corrosion-resistant brass phase and ground pins. It measures 5 Inch diameter x 12.300 Inch.
Plug has current rating of 100 Amps and voltage rating of 250 VAC. It resists 500 Volts for one minute at greater than or equal to 5 mega-Ohm to offer insulation resistance. It has an endurance of up to 250 connects and disconnects, under load, at full rated current and voltage conditions. It can withstand dielectric voltage rating of 2000 Volts for one minute and maximum temperature rise of 30 deg C after 50 cycles OL at 150% rated current.
Plug has a flammability rating of V-2 per UL94 to withstand harsh environmental conditions. It has ferrous parts immersed in 10% ammonium chloride solution at 20 deg C for 10 minutes to provide corrosion resistance. It is moisture resistant, watertight and has an IP rating of IP67. It has a force of 150 lb, torque of 2 ft-lb and maximum dispersion of less than or equal to 3/32 Inch to secure the cable.
Plug has a cord size of 0.95 - 1.875 inches. It has good impact resistance and withstands 250 lb for one minute after conditioning at -25 deg C for six hours to meet the crush test. It has durable zinc-plated internal screws, steel terminal screws and acid proof external screws. It has a minimum withdrawal force of 20 lb. Pin and sleeve plug meets UL/CSA/IEC/CE standards.
|Amperage Rating||100 Amp|
|Application||For Industrial Applications|
|Catalog Description||100 Amp, 250 Volt 3-Phase, IEC 309-1 & 309-2, 3P, 4W, North American-Rated Pin & Sleeve Plug, Industrial Grade, IP67, Watertight - Blue|
|Constructional Feature||Corrosion Resistant, Impact Resistant, Moisture Resistant, Uv Resistant, Water Tight|
|Country of Origin||SE|
|Degree Of Protection||IP67|
|EU RoHS Indicator||Y|
|Environmental Conditions||Flammability Rated V-2 Per UL94, Corrosion Resistance Ferrous parts immersed in 20 deg C, 10 percent ammonium chloride solution for 10 min, Moisture Resistance Per UL 1682, immersed for 24 hours in 5 cm of 25 deg C water|
|Invoice Description English||PN&SL PLUG 100A W|
|Maximum Cable Outer Diameter||1.875 in|
|Minimum Cable Outer Diameter||0.95 in|
|Number Of Poles||3|
|Number of Poles||3|
|Number of Wires||4|
|Select Code||WIRING DEV/DIMMERS|
|Standard||CSA Certified (C22.2 No 182.1);UL Listed (1682 and 1686);IEC Rating (60309-1 and 60309-2);CE Marking (Per low voltage directives 73/23/EEC, 93/68/EEC)|
|Standards||UL 1682 And 1686, CSA C22.2 No 182.1, IEC Rating - 60309-1 and 60309-2, CE Marking - Per low voltage directives 73/23/EEC, 93/68/EEC|
|Voltage Rating||250 Volt AC|
|Wire Size||3-1 AWG, 0.950 - 1.875 Inch|
|description||LEV 4100P9W PN&SL PLUG 100A W|
|feature#1||Size: 5.000 Inch Dia x 12.300 Inch Length|
|feature#2||Maximum 30 deg C temperature rise after 50 cycles of overload at 150% of rated current|
|feature#3||Certified for current interrupting at full rated current|