Leviton BR20-GY Double Pole Straight Blade Duplex Receptacle; Wall Mount, 125 Volt, 20 Amp, Gray
|•||Dimension: 1.560 Inch Width x 1.090 Inch Depth x 4.060 Inch Height|
|•||Maximum 30 deg C temperature rise after 100 cycles OL at 150 percent rated current|
|•||Ratings are permanently marked on device|
|•||Back-wiring clamps accept up to No. 10 copper or copper-clad wire|
|•||Convenient washer-type break-off plaster ears for best flush alignment|
|•||Captive mounting screws for fast installation|
|•||Break-off tabs on duplex receptacles for easy two-circuit conversion|
Leviton Straight blade duplex receptacle in gray color features nylon body and face for impact as well as rust resistance. Receptacle has a power rating of 1 hp and comes with zinc-plated steel strap/clamp nuts. Receptacle features large-head terminal screw that is backed out and staked. It can withstand various demands of commercial/institutional applications. It features shallow design for maximum wiring room in box as well as captive mounting screws for quick installation. It works at full rated current and can withstand up to 2000 Volts. The 2-Pole self-grounding receptacle has three-wire circuitry and comes with 0.031-Inch thick brass triple-wipe line contacts. It has a current rating of 20 Amps and voltage rating of 125 Volts.
It measures 1.560 Inch x 1.090 Inch x 4.060 Inch. Receptacle has back and side wired connection for added convenience. It can accommodate a wire of size 14 - 10 AWG and has brass-hot, green-ground and silver-neutral terminal for easy identification. It has brass 10-32 terminal screws, brass 8-32 grounding screw, brass plated ground clips and 5-20R NEMA configuration. It has a rated UL 94 V-2 flammability and operates at -40 to 60 deg C temperature. It can be used to achieve superior flush alignment by the convenient washer-type break-off plaster ears. Receptacle is UL 498 listed/CSA certified and meets NEMA/ANSI standards.
|Case Quantity||1, 10 , 100|
|Select Code||WIRING DEV/DIMMERS|
|Special Features||Category 6 modular jacks, RJ45 keystone jacks, is 8-position 8-conductor (8P8C) is engineered to provide superior performance and reliability, supporting gigabit ethernet applications and beyond ; The advanced printed circuit board design is tuned to provide optimum signal quality with maximum headroom ; It offers superior signal quality and noise reduction due to its enhanced near-end and far-end crosstalk cancellation and minimum return losses and improves performance by rejecting noise and unwanted signals ; The EZ connector's flat back IDC construction offers faster installation through its straight through in-line termination design and one piece snap-on termination cap allows for a quick and easy termination ; Category 6 rated connectors provide excellent performance for data networks requiring maximum speed and bandwidth ; PCB technology provides maximum performance and superior signal quality ; Designed with in-line 110 IDC, in-sequence termination reducing termination time ; Terminate with 110 punch down tool ICACSPDT00 ; Includes an integrated TIA-568A/B color wiring diagram ; Backwards compatible to all lower rated category components ; Compatible with all ICC configurable faceplates, inserts, surface mount boxes, and blank patch panels, ICC furniture faceplates, Elite bezels, and Elite surface mount boxes ; Installation instructions included ; DC resistance is 0.1 OHM max ; Transmission performance exceeds category 6 connecting hardware requirements specified in TIA/EIA-568-B.2-1 when used with compatible horizontal cable ; 750 cycles min plug insertion life ; Plug and jack contact force is 100 GM min using FCC approved plug ; Plug retention force: 30 LB min ; Polycabonate termination cap|