Lutron H3DT832GU210 Hi-Lume® 3D Fluorescent Ballast; 120/240/277 Volt, 68.9 Watt At 120 Volt, 66.3 Watt At 240 Volt, 66.5 Watt At 277 Volt, 2-Lamp, Programmed Rapid Start

*Images are representative of products listed and may not be actual product.

     

AVAILABILITY

Ready to Ship
0


Need more? Additional inventory ships in 10 business days.


Out of stock.
Ships in 10 business days.


Add to Shopping List

Your Price
$109.56 / each


 
Vendor: Lutron
Cat #: H3DT832GU210
Part #: 145388
SKU: 465353
UPC #: 027557774925

Product Details

Dimension: 9.500 Inch Length x 1 Inch Width
Hi-lume 3D ballasts deliver high dimming ratios and efficiency in a slim-profile enclosure, making it a great choice for low-profile architectural fixtures
Because Hi-lume 3D is microprocessor-controlled, it can operate on the EcoSytem digital control bus and has the ability to listen, think, decide and remember, this provides a new level of flexibility in configuring lighting while saving energy
Programmed rapid start design preheats lamp cathodes before applying full arc voltage to enhance lamp life
Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 and 42 kHz
Ultra-quiet operation
Factory-tuned ballasts with a custom ballast factor lower than standard models are available, and can be selected by utilizing the ballast selection tool
Lamp current Crest factor is less than 1.7

Lutron Hi-Lume® 3D Electronic dimming ballast has a voltage rating of 120/277 Volts. Ballast is compatible with T8, U bent lamps and can operate two lamps of power rating 32 Watts. A-rated ballast operates silently and has a ballast factor of 1. Energy efficient ballast incorporates inrush current limiting circuitry to prevent circuit breaker tripping, switch arcing and relay failure. It features programmed starting method that ensures long lamp life.

Dimming ballast provides uniform lighting and is ideal for all industrial applications. Ballast features flicker-free dimming from 100% to 0.7% for T8 lamps. Ballast offers wide range of dimming level without going to full brightness. It has very low harmonic distortion throughout the entire dimming range and maintains consistent light output for different lamp lengths. The case has a temperature rating 75 deg C.

Ballast incorporates end of life protection circuitry that ensures safe operation. Ballast is grounded by a mounting screw to the fixture. Ballast has high power factor greater than 0.95. It measures 9.500 Inch x 1 Inch. Ballast is UL listed and CSA certified.

Product Specifications

ANSI Code C82.11, C62.41
Amperage Rating 0.58 Amp At 120 Volt, 0.28 Amp At 240 Volt, 0.24 Amp At 277 Volt
Application For Lutron 3-Wire Fluorescent Controls And EcoSystem Digital Controls
Ballast Efficiency Factor 1.52 At 120 Volt, 1.51 At 240 Volt, 1.5 At 277 Volt
Ballast Factor 1
Catalog Description Hi-lume 3D 1% 3-Wire and EcoSystem Digital Link Controlled T8 Linear and U-Bent, 2 lamps, ballast factor of 1.00, G-can, 32W
Catalog Number H3DT832GU210
Country of Origin MX
Dimmable Yes
Environmental Conditions <90% Relative Humidity (Non-Condensing)
Frequency Rating 50/60 Hz
GTIN 00027557774925
Height 2.380 Inch
Invoice Description English HI-LUME 3D T8 32W 2 LAMP
Item 3D Ballast
Lamp Type 32 Watt T8 Linear and U-Bent Fluorescent
Length 9-1/2 Inch
Mfr/Vendor Lutron
Minimum Starting Temperature 50 deg F
Mounting Screw
Number of Lamps 2
Power Factor >0.95
Select Code WIRING DEV/DIMMERS
ShortDescriptionStripped Lutron-H3DT832GU210-Hi-Lume-3D-Fluorescent-Ballast
Special Features Continuous, Flicker-Free Dimming From 100% To 1% Or Less Standard 3-Wire Line-Voltage Phase-Control Technology For Consistent Fixture-To-Fixture Dimming Performance, Programmed Rapid Start Design Will Preheat Lamp Cathodes Before Applying Full Arc Voltage
Standard California Energy Commission (CEC) Listed, UL Listed (Evaluated To The Requirements Of UL935), CSA Certified (Evaluated To The Requirements Of C22.2 No. 74), Meets ANSI C82.11 High Frequency Ballast Standard, Meets FCC Part 18 Non-Consumer Requirements Fo
Standards UL 935, CSA C22.2 No. 74, CEC Listed, NOM Listed, ISO 9001:2008, ANSI C82.11, C62.41, FCC Part 18 Non Consumer
Start Type Programmed Rapid
Sub Brand Hi-Lume®
Temperature Rating 75 deg C Case
Thermal Protection Class P
Total Harmonic Distortion <10%
Type Architectural Dimming, Energy saving
UPC 027557774925
Voltage Rating 120/240/277 Volt
Wattage 68.9 Watt at 120 Volt, 66.3 Watt at 240 Volt, 66.5 Watt at 277 Volt
Width 1 Inch
Wire Size 18-16 AWG (0.75 or 1.5 mm2) Solid Copper Terminal
description LUT H3DT832GU210 HI-LUME 3D T8 32W
feature#1 Please call your local branch or 1-855-999-2372 for availability & price.
feature#2 Hi-lume 3D ballasts deliver high dimming ratios and efficiency in a slim-profile enclosure, making it a great choice for low-profile architectural fixtures
feature#3 Because Hi-lume 3D is microprocessor-controlled, it can operate on the EcoSytem digital control bus and has the ability to listen, think, decide and remember, this provides a new level of flexibility in configuring lighting while saving energy
feature#4 Programmed rapid start design preheats lamp cathodes before applying full arc voltage to enhance lamp life
feature#5 Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 and 42 kHz
feature#6 Ultra-quiet operation
feature#7 Factory-tuned ballasts with a custom ballast factor lower than standard models are available, and can be selected by utilizing the ballast selection tool
feature#8 Lamp current Crest factor is less than 1.7

CUSTOMER QUESTIONS & ANSWERS

 

REVIEWS