LutronECO-T524-120-2 Eco-10® Fluorescent Dimming Ballast; 120 Volt, 28 Watt, Programmed Rapid Start

*Images are representative of products listed and may not be actual product.

     

This product has been discontinued. We currently have 1 remaining in stock.

AVAILABILITY

Ready to Ship
1



Your Price
$117.39 / each


 
Vendor: Lutron
Cat #: ECO-T524-120-2
Part #: 237692
SKU: 445887
UPC #: 027557800280

Product Details

Dimension: 18 Inch Length x 1.180 Inch Width x 1 Inch Height
Lamps turn on to any dimmed level without flashing to full brightness
End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life cycle
Ultra-quiet operation
Protected from miswires of any input power to control lead
Case type C
Lamp current crest factor less than 1.7

Lutron Eco-10® Fluorescent dimming ballast comes with programmed rapid start design that preheats the lamp cathodes before applying full arc voltage. It has a voltage rating of 120 Volts and power rating of 28 Watts. Ballast measures 18 Inch x 1.180 Inch x 1 Inch and offers 100% - 10% dimming. It has standard 3-wire line-voltage phase-control technology for consistent fixture-to-fixture dimming performance.

Ballast offers low harmonic distortion throughout the entire dimming range that maintains power quality. It has a frequency rating of 60 Hz that ensures ballast does not interfere with infrared devices operating between 38 and 42 kHz and has temperature rating of 75 deg C. Ballast has a current rating of 0.62 Amps and 7-Amps inrush current limiting circuitry that help to eliminates circuit breaker tripping, switch arcing and relay failure. Ballast is UL/CEC listed, CSA certified and meets ANSI standards.

Product Specifications

Alternate Part Number ECOT5241202
Amperage Rating 7 Amp (Maximum Inrush), 0.62 Amp (Ballast)
Ballast Factor 1
Circuit Type High Output, Inrush Current Limiting
Commodity Code 7412
Dimmable Yes
Dimming Type Continuous 100 to 10 Percent
Environmental Conditions Maximum 90% Relative Humidity (Non-Condensing)
Frequency Rating 60 Hz
Height 1 Inch
In Stock Yes
Input Voltage 120 V
Item Ballast
Lamp Starting Temperature 10 deg C
Lamp Style Linear
Lamp Type 24 Watt T5/HO Linear Fluorescent
Length 18 Inch
Maximum THD 20 Percent
Mfr/Vendor Lutron
Minimum Starting Temperature 10 deg C
Model ECO-T524-120-2
Number of Lamps 2
Power Factor >0.95
Select Code WIRING DEV/DIMMERS
ShortDescriptionStripped LutronECO-T524-120-2-Eco-10-Fluorescent-Dimming
Standards UL935 Listed, CSA C22.2 No.74, CEC Listed, Meets ANSI C82.11 High Frequency Ballast Standard, Meets FCC Part 18 Non-Consumer Requirements For EMI/RFI Emissions, Meets ANSI C62.41 Category A Surge Protection Standards Up to and Including 4 Kilo-Volt
Start Type Programmed Rapid
Starting Type Programmed Rapid
Sub Brand Eco-10®
Temperature Rating 75 deg C
Total Harmonic Distortion <20%
Type High Frequency
UPC 027557800280
Voltage Rating 120 Volt
Wattage 28 Watt
Width 1.180 Inch
description Lutron Eco-10® Fluorescent dimming ballast comes with programmed rapid start design that preheats the lamp cathodes before applying full arc voltage. It has a voltage rating of 120 Volts and power rating of 28 Watts. Ballast measures 18.000 Inch x 1.180 Inch x 1.000 Inch and offers 100% - 10% dimming. It has standard 3-wire line-voltage phase-control technology for consistent fixture-to-fixture dimming performance.

Ballast offers low harmonic distortion throughout the entire dimming range that maintains power quality. It has a frequency rating of 60 Hz that ensures ballast does not interfere with infrared devices operating between 38 and 42 kHz and has temperature rating of 75 deg C. Ballast has a current rating of 0.62 Amps and 7-Amps inrush current limiting circuitry that help to eliminates circuit breaker tripping, switch arcing and relay failure. Ballast is UL/CEC listed, CSA certified and meets ANSI standards.
feature#1 Please call your local branch or 1-855-999-2372 for availability & price.
feature#2 Lamps turn on to any dimmed level without flashing to full brightness
feature#3 End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life cycle
feature#4 Ultra-quiet operation
feature#5 Protected from miswires of any input power to control lead
feature#6 Case type C
feature#7 Lamp current crest factor less than 1.7

CUSTOMER QUESTIONS & ANSWERS

 

REVIEWS