Marley 2503W Electric Baseboard Heater; 750 Watt, 208 Volt, Floor/Wall Mount Steel, Navajo White, Powder-Coated
|•||Dimension: 3 ft Width x 2-7/8 Inch Depth x 6-3/4 Inch Height|
|•||Heaters shall be designed to permit use of supply conductors with 60 deg C insulation|
Marley 2500 Series Electric baseboard heater in Navajo white color has powder-coated finish for resistance against corrosion. The front cover of the heater is made of minimum 0.26-Inch pre-painted steel. It offers quiet operation and is free from popping/pinging. It measures 3 ft x 2-7/8 Inch x 6-3/4 Inch. Heater has a voltage rating of 208 Volts and power rating of 750 Watts. The junction box enclosure provides provisions for incoming and outgoing cable with cable clamp to restrain without added hardware. Junction box is provided with ground wire pigtail for grounding.
Heater has aluminum fins that are ergonomically designed to block sheath radiation to front and back of heater body. It comes with built-in safety thermal cut-off for optimum protection. The heating element wire is encased in steel sheath to ensure long and trouble free life. Field installation of optical raceway kit from end to end is achieved with easy out knockouts inside wiring compartment. Heater comes with pre-notched mounting guide marks for fast and easy installation without disassembly. It can be floor or wall mounted. Baseboard heater is cUSUL listed.
|Application||For Single Family Homes, Apartments, Modular or Mobile, Supplemental Heat Addition, Remodels and Much More|
|Catalog Description||Marley: 2500 Series - 376 to 2500W, 145 or 250 Watts per ft., 2' - 8n++ lengths, 1 phase only|
|Country of Origin||USA|
|Dimension||3 ft Width x 2-7/8 Inch Depth x 6-3/4 Inch Height|
|Heating Element||Sheathed Steel|
|Invoice Description English||750W @ 208V, 3n++ Residential Baseboard Heater|
|Power Rating||750 Watt|
|Voltage Rating||208 Volt|
|description||MLY 2503W 750W @ 208V, 3n++ Residenti|
|feature#1||Dimension: 3 ft Width x 2-7/8 Inch Depth x 6-3/4 Inch Height|
|feature#2||Heaters shall be designed to permit use of supply conductors with 60 deg C insulation|