WAC Lighting EN-1260-RB2 Low Voltage Enclosed Electronic Transformer; 12/24 Volt Output

*Images are representative of products listed and may not be actual product.

     

AVAILABILITY

Ready to Ship
3


Need more? Additional inventory ships in 10 business days.


Add to Shopping List

Your Price
$39.06 / each


 
Vendor: WAC
Cat #: EN-1260-RB2
Part #: 19164
SKU: 317025
UPC #: 790576094700

Product Details

Dimension: 6.625 Inch Length x 1.625 Inch Width
1 Watt minimum load
Intrinsically safe, Class 2 transformers permit no greater than a 5 amp current be drawn
Drop down to a smaller gauge wire if space in fixture does not permit secure connection directly with the non-metallic sheathed cable
Powers most cabinet fixture
Built-in auto reset, soft start, short and overload circuit protection features, the soft start delayed start feature extends lamp life by delaying the abrupt inrush current to the lamp
Dimmable with electronic low voltage dimmers, dimmers should always be installed on the primary side of the transformer
Enclosure has knockouts on three sides, screw holes are located on one long side for securing enclosure in place

WAC Lighting Class 2 Low voltage enclosed electronic transformer in black color is used as an enclosed remote transformer. It has a input voltage rating of 120 Volts and output voltage rating of 12 Volts. It has a power rating ranging from 20 - 60 Watts. Secondary wiring for class 2 transformer does not require conduit sheathed cable or clamp wiring techniques. Non-metallic cable can be used for secondary wiring in walls and ceilings. It does not allow to draw currents greater than 5 Amps. It powers most cabinet fixtures. It powers most cabinet fixtures. Class 2 enclosed electronic transformer measures 6.625 Inch x 1.625 Inch.

Product Specifications

Alternate Part Number EN1260RB2
Application Used As An Enclosed Remote Transformer
Catalog Description Wac Lighting EN-1260-RB2 Electronic Transformer, Low Voltage, Enclosed, Class-II, EN-1260-RB2, 120 V Input, 12 V Output, 20 - 60 WTT, 20 KHZ, Remote Boxed, Class II Enclosure, Black, 6-5/8 IN Length, 1-5/8 IN Width, 1-1/8 IN Height, Polycarbonate, Aluminum, 0.53 AMP At 120 V Maximum Input Amperage, UL And CUL Listed, Used As An Enclosed Remote Transformer
Catalog Number EN-1260-RB2
Color Black
Country of Origin US
Enclosure Remote Boxed, Class II
Frequency Rating 20 Kilo Hz
GTIN 00790576094700
Height 1-1/8 Inch
In Stock Yes
Input Voltage 120 Volt
Invoice Description English ELECTRONIC TRANSFORMER,BLK
Item Electronic Transformer
Length 6-5/8 Inch
Mfr/Vendor WAC
Model EN-1260-RB2
Output Voltage 12/24 Volt
Power Rating 60 Watt
Select Code LIGHTING
ShortDescriptionStripped WAC-Lighting-EN-1260-RB2-Low-Voltage-Enclosed
Special Features Contains an on/off toggle switch at the base and a 6 FT detachable cord ; Built-in auto reset, soft start, short and overload circuit protection features ; The soft start delayed start feature extends lamp life by delaying the abrupt inrush current to the lamp ; Class II transformers are inherently protected and power limited, protecting the lighting system from both normal and abnormal short circuits ; True RMS meter is required to read the high frequency output ; Accessories: MTB-01 %X96 Multiple terminal block ; 5 YR product warranty
Standard UL And CUL Listed
Standards UL Listed
Type Class 2, Enclosed
UPC 790576094700
Wattage 20 - 60
Width 1-5/8 Inch
description WAC EN-1260-RB2 ELECTRONIC TRANSFOR
feature#1 Dimension: 6.625 Inch Length x 1.625 Inch Width
feature#2 1 Watt minimum load
feature#3 Intrinsically safe, Class 2 transformers permit no greater than a 5 amp current be drawn
feature#4 Drop down to a smaller gauge wire if space in fixture does not permit secure connection directly with the non-metallic sheathed cable
feature#5 Powers most cabinet fixture
feature#6 Built-in auto reset, soft start, short and overload circuit protection features, the soft start delayed start feature extends lamp life by delaying the abrupt inrush current to the lamp
feature#7 Dimmable with electronic low voltage dimmers, dimmers should always be installed on the primary side of the transformer
feature#8 Enclosure has knockouts on three sides, screw holes are located on one long side for securing enclosure in place

CUSTOMER QUESTIONS & ANSWERS

 

REVIEWS