3M 5501 QS-II Inline Splice Kit; 4-1/0 AWG and 2/0 AWG Stranded, 2-1/0 AWG Solid

*Images are representative of products listed and may not be actual product.
  • 3M 5501 3M 5501 QS-II Inline Splice Kit; 4-1/0 AWG and 2/0 AWG Stranded, 2-1/0 AWG Solid
Manufacturer: 3M
Catalog#: 5501
Crescent Part#: 13749
UPC: 054007122937
Crescent truck delivery only ?
Free Shipping!
Your Price:

Product Details

No soldering required

Minimum amount of taping

No special tools required to install

100% factory tested splices

Peroxide cured EPDM rubber, assures splice life equal to the cable

Immediately energizable

Computer generated stress plots shows outstanding electrical properties of complete splice

Shield continuity assembly results in fast, easy, effective continuation of shield across splice body

Product Details:

3M QS-II inline splice kit are pre-molded 15 kilo-Volts class splices for splicing solid dielectric insulated shielded cables. It can accommodate ribbon, Unishield ® and wire shielded cables. Kit has 175 or 220 mil thick of insulation with copper and aluminum conductor size 4 to 2/0 AWG for stranded conductor and 2 to 1/0 AWG for solid conductor. Splice body is made of molded Rubber. It includes shield continuity assembly, shield clamp, two Cold Shrink end seals, mastic sealing strip, two tubes of silicone grease, solvent saturated cleaning pad and plastic glove. It also includes two Scotch 24 shielding tape strips, Scotch 13 semi-con tape roll and Scotch 35 vinyl tape roll.

Splice kit can be used with solid dielectric cables, cross-linked polyethylene and ethylene propylene rubber. It is used indoor, outdoor and direct buried applications. It is also used in vault, cable tray, junction boxes and ducts applications. It is used for cable rupture, dig-ins and cable reel ends. Kit meets IEEE standard 404-1993 for power cable joints.

Product Specification

Product Details
Manufacturer 3M
Catalog# 5501
Product Dimensions & Details
Dimensions W:7'' x H:5'' x L:15''
Height 5.00
Length 15.00
Width 7.00
Shipping Information
Ships Freight Yes
Other Information
Material Aluminum/Copper
Item Splice Kit
Conductor Size 4-1/0 AWG Stranded, 2/0 AWG, 2-1/0 AWG Solid
Size 9 Inch Length x 1.760 Inch Height
Brand Name 3M
Application For Splicing Solid Dielectric Insulated, Single Conductor Copper or Aluminum Tape Shielded/Wire Shielded and UniShield® Cables, Use in Direct Buried Applications, Use in Indoor and Outdoor Vault, Cable Tray, Junction Boxes, Ducts, Cable Rupture and Dig-Ins, Cable Reel Ends
Insulation 0.637 - 0.900 Inch OD Molded Rubber
Includes (1) Molded Rubber Splice Body, (1) Shield Continuity Assembly, (1) Shield Clamp, (2) Cold Shrink End Seals, (1) Mastic Sealing Strip, (2) Strips Scotch 24 Shielding Tape(1) Roll Scotch 13 Semi-Con Tape, (1) Roll Scotch 35 Vinyl Tape, (2) Tubes Silicone Grease, (1) Solvent Saturated Cleaning Pad, (1) Plastic Glove, (1) Instruction Sheet
Type QS-II Series, In-Line
Voltage Rating 15 Kilo-Volt
Standards Meets the Requirements of IEEE 404

Customer Questions & Answers

Ask your questions, share your answers.
We respect your privacy. Specify email and we will send the answer to your address. We never reveal your information or use it to send you not related email.
Write a Review

Review /

Customer Reviews
This product is not rated. Click here to rate this product!

Login for Availability

3M