The coppertop compression connector is a standard item to transition from the cable to the loadbreak probe
3M 5810 Series Industrial loadbreak elbow kit is designed for connecting 5 - 15 kilo-Volts underground cable to transformers and to use on tape shield, wire shield, unishield as well as jacketed concentric neutral types of power cables. It includes elbow body and the bushing insert, coppertop compression connector, tin plated copper loadbreak probe with an ablative arc-follower tip, silicone lubricant, probe installation tool, three mastic strips, constant force spring, cold shrink jacketing tube, CC-3 cable cleaning pads, ground braid assembly, stainless steel reinforced pulling-eye and a capacitive test point with installation instructions. Loadbreak elbow is molded with high quality peroxide-cured EPDM insulation. Elbow kit has fully shielded and insulated plug-in separable connector. Kit can be used for cable insulation diameter range of 0.850 - 1.100 inches. It has current rating of 200 Amps.
Kit can be used for connecting shielded power cables to loadbreak bushings. Elbow connector and bushing insert encompass the necessary components of all loadbreak connections. Aluminum crimp barrel is inertia-welded to a copper lug that ensures a reliable, tight, cool operating connection with the loadbreak probe. Elbow connector accepts cables of size 2/0 AWG stranded at 15 kilo-Volts, 3/0 AWG compact/solid at 15 kilo-Volts with 133% insulation level. Kit meets ANSI/IEEE standards.
|Catalog Description||3MÖ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield« and JCN types of cables. The elbow is peroxide cured EPDM.|
|Ships Ground. Eligible for expedited shipping||Yes|
|Size||2/0 AWG; 3/0 AWG|