One-piece versatile design, allowing quick installation and accommodating a wide range of cable sizes
Cold shrink delivery system for easy installation, simply place termination over prepared cable and unwind core to shrink into place (no force fit required)
High-k stress control, specially formulated high dielectric constant material minimizes surface stress by more uniformly distributing the electrical field over the entire surface of the insulator
Compact design provides for easier installation in restricted spaces
Silicone rubber insulators, EPDM stress control tubes, stress controlling compound and environmental sealing compound are compatible with all common solid dielectric insulations, such as polyethylene (PE), cross-linked polyethylene (XLPE) and ethylene propylene rubber (EPR)
No torches or heat required
Excellent thermal stability
Good solvent resistance, compatible with industry-approved cable cleaners
3M 7693-S Cold shrink QT-III termination kit includes a cold shrink silicone rubber breakout boot assembly, a cold shrink silicone rubber jacket seal assembly, three silicone rubber phase re-jacketing sleeve assemblies, three cold shrink silicone rubber tubular termination assemblies, a constant large force spring and a tinned copper ground braid assembly. Kit contains three constant small force springs, eight mastic seal strip, a roll scotch ® super 33+® vinyl electrical tape, a roll scotch ® vinyl electrical tape super 88, a roll scotch ® 24 electrical shielding tape, a cable cleaning preparation kit and an instruction sheet.
Cold shrink termination kit has tape shield, wire shield and Unishield ® constructions. It is designed for terminating solid dielectric shielded power cables rated 5 - 25 kilo-Volts. Termination kit has insulation up to 0.92 - 1.18 Inch outer diameter. It is compatible with 1 AWG, 1/0 AWG, 2/0 AWG, 250 kcmil, 3/0 AWG, 300 kcmil, 350 kcmil, 4/0 AWG, 400 kcmil and 500 kcmil. Kit has a basic insulation level of 150 kilo-Volts. It is designed for outdoor applications. Termination kit is IEEE approved.
|Cable Type||Tape Shield; UniShield(R); Wire Shield|
|Catalog Description||3MÖ Cold Shrink QT III 7600 S 3G Series Termination Kit includes a skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield« power cables. The conjunction of high dielectric constant material and sealing compounds allows the termination to withstand voltages of 5 to 35kV.|
|Conductor Size||1 AWG; 1/0 AWG; 2/0 AWG; 250 kcmil; 3/0 AWG; 300 kcmil; 350 kcmil; 4/0 AWG; 400 kcmil; 500 kcmil|
|Number Of Terminals||3|
|Replaced Catalog Number||7693-S-4-3G*|
|Ships Ground. Eligible for expedited shipping||Yes|