One-piece versatile design, allowing quick installation and accommodating a wide range of cable sizes
Cold shrink delivery system allows easy installation, simply place termination over prepared cable and unwind core to shrink into place (no force fit required)
Stress control, specially formulated high dielectric constant material minimizes surface stress by more uniformly distributing the electrical field over the entire surface of the insulator
Compact design provides for easier installation in restricted spaces
Silicone rubber insulators, EPDM stress control tubes, stress controlling compound and environmental sealing compound are compatible with common solid dielectric insulations, such as polyethylene (PE), cross-linked polyethylene (XLPE) and ethylene propylene rubber (EPR)
Contains sufficient quantities of material to make 3 terminations (Lugs must be ordered separately)
100%, 133% insulation level
3M 7695-S Series 4-Skirt cold shrink QT-III termination kit includes six strips scotch ® mastic strip 2230, three high-K, tracking resistant, silicone rubber skirted terminations and a 3M cable cleaning preparation kit CC-2. Kit includes three pre-formed ground braids, three constant force spring, three 3M EMI copper foil shielding tape 1181 Strips and an instruction sheet. Kit is designed for terminating solid dielectric shielded power cables rated 5 - 25/28 kilo-Volts.
Cold shrink termination kit has tape shield, wire shield and Unishield ® constructions. Termination kit has insulation up to 1.05-1.80 Inch outer diameter. It is compatible with 1000 kcmil/1250 kcmil/1500 kcmil/250 kcmil/300 kcmil/350 kcmil/400 kcmil/500 kcmil/600 kcmil/700 kcmil/750 kcmil/800 kcmil and 900 kcmil. Kit has a basic insulation level of 150 kilo-Volts. It is designed for outdoor applications. Termination kit is IEEE approved.
|Cable Type||Tape Shield; UniShield(R); Wire Shield|
|Catalog Description||3MÖ Cold Shrink QT III 7620 S, 7680 S & 7690 S Series Termination Kit includes three 1 piece, 3 phase, skirted terminations. It ensures a pliable, tight seal for tape shield, wire shield and UniShield« power cables. The conjunction of high dielectric constant material and silicone rubber insulation allows the termination to withstand voltages of 5 to 35kV.|
|Conductor Size||1000 kcmil; 1250 kcmil; 1500 kcmil; 250 kcmil; 300 kcmil; 350 kcmil; 400 kcmil; 500 kcmil; 600 kcmil; 700 kcmil; 750 kcmil; 800 kcmil; 900 kcmil|
|Number Of Terminals||1|
|Ships Ground. Eligible for expedited shipping||Yes|