Clamps provide maximum versatility of installation where equipment is likely to be moved from one location to another, Installation is fast and modification is simple
Supports cable in flexible connecting circuits used to feed equipment. Cable is run in fixed overhead bused structures to a point directly above equipment then dropped with a 90 degree bend. At the point of drop, the cable clamp is installed to support the cable
Appleton Bus-drop cable guide clamp measures 0.12 Inch x 7.30 Inch x 7.50 Inch is ideal for exposed branch feeder installations. Two back to back clamps allow for an extra loop providing extra cable footage where equipment is likely to be moved from one location to another. One clamp covers a range of cable sizes 0.400-Inch - 1.187-Inch and can be used for one 90 degree bend. It prevents wire terminal strain and possible conductor breakage by attaching a guy wire to the cable where it leaves bus structure.
|Dimensions||W:8'' x H:1'' x L:8''|
|Ships Ground. Eligible for expedited shipping||Yes|
|Cable Size||0.400 - 1.190 Inch|