Dimension: 1-3/8 Max Dia x 0.530 Throat ID x 1-1/4 Inch Body Length
Dual grommet style for over 1 Inch dia cord range, removable insert allows for wider range of cable diameters within single fitting
Simple installation, cord can be installed without disassembly of the fitting
Liquid tight, oil tight, rain tight
Slim diameter profile allows close spacing between connectors
Furnished complete with sealing ring and locknut
O-Z/Gedney Grip-Tite Straight strain relief connector has straight orientation and has cable jackets for easy connection. It has conductor size of 0.250 - 0.375 Inch. Taper threaded 1/2-Inch male hub NPT has removable insert to allow wider range of cable within a single fitting. Connector measures 1-3/8 Inch diameter x 0.530 Inch inner diameter x 1-1/4 Inch. It is designed with a nylon gripper for exceptional pullout protection and a neoprene grommet for moisture-proof seal.
Connector has a iron/zinc-plated body for durability. PVC sealing ring and steel lock nut/gland nut is provided to secure the cable. Colored gripper is included to allow easy product identification. It withstands a temperature of 90 deg C. Connector is UL listed/CSA certified and meets NEMA standards.
|Application||For Securing And Sealing Cords Or Cables Entering Enclosures Or Raceways|
|Catalog Description||OZ-Gedney Type SR Grip-Tite Strain Relief Straight Connector, Size: 1/2 IN, Conductor Range: 0.25 - 0.375 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated Body|
|Conductor Range||0.25 - 0.375|
|NEMA Rating||NEMA 4|
|Ships Ground. Eligible for expedited shipping||Yes|
|Special Features||Provide strain relief to protect the cord or cable from pullout; Grip-tite style, 2-piece internal design features a nylon gripper for exceptional pullout protection and a neoprene grommet for a moisture-proof seal (up to 1 IN diameter cord range); Simple installation, cord can be installed without disassembly of the fitting; Liquidtight/oiltight/raintight; Suitable for NEMA 4 enclosures and other wet locations; Slim diameter profile allows close spacing between connectors; Furnished complete with sealing ring and locknut; Colored gripper allows for easy identification; UL Listed NEMA 4, 6 and 12 when installed into a NPT threaded entry or UL listed conduit hub (sizes 1-1/4 IN and larger require thread sealant)|
|Standard||Third Party Certification: UL File Number E-11857, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, Suitable for use in Hazardous Locations under NEC Sec. 501-4(b), 502-4(a) (2), and 503-3(a), For Class I, Division 2, Class II, Division 1, 2, and Class III, Division 1, 2|
|Type||Type SR Grip-Tite Strain Relief Straight Connector|