Size: 2.500 Inch Length x 3.750 Inch Width x 3.500 Inch Height
Universal acceptance of several sizes of cylindrical shapes makes this suitable for industrial construction and maintenance work as well as telecommunications grounding
Terminal may be mounted parallel, 45 deg or 90 deg to the pipe, acceptable for direct burial
Large, smooth connector contact area between pipe and ground clamp
Provides large surface contact area to maximize contact area between connector and pipe
The GAR-TC mounting pad permits parallel, 45 deg or 90 deg angle connections to the pipe
Pre-drilled pad for (2) 3/8 bolts on 10 centers
Hubbell Electrical / Burndy GAR-TC Series Mechanical Water-pipe grounding connector is made from copper alloy for enhanced durability. It has a bolt size of 3/8 - 16 AWG for easy wire accommodation. Grounding connector is ideally designed for direct burial in concrete or earth. It allows direct mounting of two hole compression terminals up to 750 kcmil to pipe. It offers superior corrosion resistance.
Unplated connector has three holes and pad configuration of 2.50 Inch x 2.50 Inch. It offers one-wrench and simplified installation. Connector measures 2.500 Inch x 3.750 Inch x 3.500 Inch. It has durable Durium silicone bronze hardware. It has a bolt size of 3/8-Inch for quick and easy fitting. Grounding connector is UL listed and CSA certified.
|Application||For Direct Burial, Water Pipe As Well As Structural And Reinforcing Rod Shapes|
|Catalog Description||Mechanical Grounding Connector, For 2 Hole Lug to Water Pipe or Rod, 1/2" - 1" Pipe, 3/8" Stud.|
|Ships Ground. Eligible for expedited shipping||Yes|
|Special Features||Features: Type GAR-TC Is A High-Conductivity Copper Ground Connector That Features A Pre-Drilled Pad, Allowing A 2-Hole Compression Terminal To Be Directly Connected To Water Pipe As Well As Structural And Reinforcing Rod Shapes, Large, Smooth Connector Contact Area Between Pipe And Ground Clamp, Provides Large Surface Contact Area To Maximize Contact Area Between Connector And Pipe, The GAR-TC Mounting Pad Permits Parallel, 45 DEG Or 90 DEG Angle Connections To The Pipe, Provides Maximum Flexibility For Field Installation, Pre-Drilled Pad For (2) 3/8 IN Bolts On 1 IN Centers, Allows Direct Mounting Of (2) Hole Compression Terminals Up To 750 KCMIL To Pipe, DURIUM Silicon Bronze Hardware, Provide Long Lasting Corrosion Resistance Acceptable For Direct Burial In Earth Or Concrete, One-Wrench Installation, Simplified Installation, UL467 Listed, Provides Quality Assurance To Recognized Industry NEC Standards From An Independent Party, Type GAR-TC Is Acceptable For Direct Burial, Ground Rod Size: 0.84 - 1.32 IN, Tube (ips) Size: 1/2 - 1 IN, Height: 3.5 IN, Installation Torque: 240 IN-LB, Width: 3-3/4 IN|
|Type||Rod or Tube Clamp with Mounting Pad|