Size: 2.500 Inch x 10.750 Inch
Bussmann Low-Peak® Class L time delay fuse is used for providing overload and short circuit protection in high capacity systems such as mains/large feeders. Fuse is rated at 600 VAC/300 VDC/1000 Amps. It has interrupting current rating of 300 kilo-Amps at 600 VAC voltage and 100 kilo-Amps at 300 VDC for safer operation of electrical devices. It has time delay of 4 seconds at 500 % rated current, perfect for device that draws large current above rated value such as motor.
Low voltage fuse with current limiting action reduces need of bus bracing in the event of a short circuit condition. It has O-ring seals to maximize pressure build-up during current limiting action and ensure filler retention. It uses high-grade silica sand filer for faster response to quench arc. Fuse contains silver links at both ends for better conductivity with low power loss. It is enclosed in a melamine glass tube and has silver plated end bells. It measures 2.500 Inch x 10.750 Inch. Fuse is UL listed and CSA certified.
|Finish||Silver-Plated End Bell|
|Dimensions||W:3'' x H:3'' x L:12''|
|Ships Ground. Eligible for expedited shipping||Yes|
|Material||Glass Melamine Tube|
|Item||Low Voltage Time-Delay Blade Fuse|
|Response Time||Delay: 4 sec Minimum At 500% Rated Current|
|Size||2.500 Inch x 10.750 Inch|
|Application||For Use With Large Distribution Switchboards, Power Panelboards, Large Machinery Disconnects|
|Amperage Rating||1000 Amp|
|Interrupt Rating||300 Kilo-Amp at 600 Volt AC, 100 Kilo-Amp at 300 Volt DC|
|Voltage Rating||600 Volt AC, 300 Volt DC|
|Standards||UL File E56412, CSA File 53787|
|Temperature Rating||-55 to 85 deg C|