Size: 1.110 Inch x 7.880 Inch
Type 2 protection for IEC and NEMA starters when properly sized
Easy selective coordination with all Low-Peak fuses using simple 2:1 ampacity ratio
Bussmann Low-Peak® Class RK1 Time-delay fuse comes with an element window to visually inspect blown element and is rated at 80 Amps/600 VAC/300 VDC. It has an interrupt rating of 300 kilo-Amps VAC RMS and 100 kilo-Amps VDC. Fuse offers a time-delay of minimum 10 seconds at 500% of rated current providing ultimate protection. It features blade ends and can be mounted on a holder with blade-knife termination. Its time-delay characteristics allow 130% FLA sizing for back-up motor overload protection and single-phasing protection. It measures 1.110 Inch x 7.880 Inch. Dual-element fuse can be used as a time-delay or a slow-blow fuse making it economical. Limits current for maximum short-circuit protection and reduced arc flash hazard.
Low voltage fuse offers low watt loss power consumption and its electrically isolated end caps provide additional safety. Also provides maximum protection to motors against burnout from overloads and single phasing. Using simple 2:1 ampacity ratio, easy selective coordination can be achieved. It finds its application in large distribution switchboards, power panelboards, motor control centers and machinery disconnect switches. Fuse is UL listed and CE/CSA certified.
|Ships Ground. Eligible for expedited shipping||Yes|
|Item||Low Voltage Time-Delay Blade Fuse|
|Response Time||Delay: 10 sec At 500% Rated Current|
|Size||1.110 Inch x 7.880 Inch|
|Application||For Use In Branch Distribution, Motors, Transformers, Solenoids, General Purpose Circuits|
|Amperage Rating||80 Amp|
|Interrupt Rating||300 Kilo-Amp RMS, 100 Kilo-Amp DC|
|Voltage Rating||600 Volt AC, 300 Volt DC|
|Standards||UL Guide JFHR File E56412, CSA C22.2 No. 248.12 Class 1422-02 File 53787|