Eaton / Cutler Hammer 9-3242-7 Magnetic Coil for Lighting

*Images are representative of products listed and may not be actual product.
  • Eaton / Cutler Hammer 9-3242-7 Eaton / Cutler Hammer 9-3242-7 Magnetic Coil for Lighting
Manufacturer: Eaton / Cutler Hammer
Catalog#: 9-3242-7
Crescent Part#: 82067
UPC: 782116136148
Your Price:

Product Details

24V 60 Hz / 20V 50 Hz

Product Details:

Eaton's Cutler-Hammer Mechanically Held Lighting Contactors are designed for industrial, commercial and outdoor lighting applications where efficient control is required. The mechanically held operation ensures that the contactor will not switch to OFF during control power failure. It also ensures the removal of coil from the circuit for noise-free operation and the elimination of all coil losses after the contactor is latched. The control module microprocessor validates the control signal before operation, so it will not respond to momentary voltage spikes of noise. The operation command has a built-in .4 sec delay to avoid multiple short-term commands that can cause contact fatigue or failure. Also, the feedback loop prevents the contactor from getting out of sequence with switches, even after power failures. Applications The mechanically held lighting contactor provides effective control in applications such as office buildings, industrial plants, hospitals, stadiums, airports, etc. They are ideal for applications that require quiet, energy-efficient operation. Designed to handle different load types: Tungsten (Incandescent Filament) Ballast (Fluorescent and Mercury Arc) High-Intensity Discharge (HID) Non-Motor AC Resistive Single- and Three-Phase Motor Ratings Features 30 Amp Power Pole Rating Up to 12 Poles Maximum Low Magnetic Noise Results in Quiet Operation Low Input VA Permits Long Wire Runs Come in a Wide Range of Input Voltages and with Coils from 24-277 VAC and 12-24 VDC Power Poles Latch Easily onto the Base, and Designating Them as NO or NC is a Simple Matter of Left or Right Positioning (Additional Poles, Either NO or NC, May Be Easily Added at Any Time)

Product Specification

Product Details
Manufacturer Eaton / Cutler Hammer
Catalog# 9-3242-7
Product Dimensions & Details
Dimensions W:2.0000'' x H:2.5000'' x L:3.5000''
Height 2.50
Length 3.50
Width 2.00
Shipping Information
Ships Ground. Eligible for expedited shipping Yes
Other Information
Catalog Description C30 Renewal Part, Magnet coil, Used with C30 Lighting Contactor, 24V
Catalog Number 9-3242-7
Coil Voltage 24V 60 Hz/20V 50 Hz
Length 3.5000
Select Code MOTOR CONTROL
Special Features Used with C30 Lighting Contactor
Application Motor and Power Control Equipment
Alternate Part Number 932427
Width 2.0000
Used On C30CN Lighting Contactor
Type Magnet coil
Country of Origin US
Commodity Code 41910
Competitor Part No. CUT932427
Standard Contact Manufacturer
GTIN 00782116136148
EU RoHS Indicator C
Gross Weight 0.290
Height 2.5000
In Stock Yes
Invoice Description English C30 Renewal Part

Customer Questions & Answers

Ask your questions, share your answers.
We respect your privacy. Specify email and we will send the answer to your address. We never reveal your information or use it to send you not related email.
Write a Review

Review /

Customer Reviews
This product is not rated. Click here to rate this product!

AVAILABILITY

In-Stock
Eaton / Cutler Hammer