Eaton / Cutler Hammer C320MH3WA0 30 Amp, 600 Volt, Module Kit 3-Wire for the C30 Modular Style Lighting Contactor, 120 Volt Control Voltage

*Images are representative of products listed and may not be actual product.
  • Eaton / Cutler Hammer C320MH3WA0 Eaton / Cutler Hammer C320MH3WA0 30 Amp, 600 Volt, Module Kit 3-Wire for the C30 Modular Style Lighting Contactor, 120 Volt Control Voltage
Manufacturer: Eaton / Cutler Hammer
Catalog#: C320MH3WA0
Crescent Part#: 146160
UPC: 782116124657
Your Price:

Product Details

Product Details:

Eaton's Cutler-Hammer Mechanically Held Lighting Contactors are designed for industrial, commercial and outdoor lighting applications where efficient control is required. The mechanically held operation ensures that the contactor will not switch to OFF during control power failure. It also ensures the removal of coil from the circuit for noise-free operation and the elimination of all coil losses after the contactor is latched. The control module microprocessor validates the control signal before operation, so it will not respond to momentary voltage spikes of noise. The operation command has a built-in .4 sec delay to avoid multiple short-term commands that can cause contact fatigue or failure. Also, the feedback loop prevents the contactor from getting out of sequence with switches, even after power failures. Applications The mechanically held lighting contactor provides effective control in applications such as office buildings, industrial plants, hospitals, stadiums, airports, etc. They are ideal for applications that require quiet, energy-efficient operation. Designed to handle different load types: Tungsten (Incandescent Filament) Ballast (Fluorescent and Mercury Arc) High-Intensity Discharge (HID) Non-Motor AC Resistive Single- and Three-Phase Motor Ratings Features 30 Amp Power Pole Rating Up to 12 Poles Maximum Low Magnetic Noise Results in Quiet Operation Low Input VA Permits Long Wire Runs Come in a Wide Range of Input Voltages and with Coils from 24-277 VAC and 12-24 VDC Power Poles Latch Easily onto the Base, and Designating Them as NO or NC is a Simple Matter of Left or Right Positioning (Additional Poles, Either NO or NC, May Be Easily Added at Any Time)

Product Specification

Product Details
Manufacturer Eaton / Cutler Hammer
Catalog# C320MH3WA0
Product Dimensions & Details
Dimensions W:2.0000'' x H:3.7500'' x L:3.7500''
Height 3.75
Length 3.75
Width 2.00
Shipping Information
Ships Ground. Eligible for expedited shipping Yes
Other Information
Length 3.7500
Contact Rating 30A
Country of Origin US
Competitor Part No. CUTC320MH3WA0
EU RoHS Indicator C
Catalog Number C320MH3WA0
Catalog Description C30 Accessory, Mechanically Held Module Kits, Used with C30 Lighting Contactor, 30A, Three-wire, 110-120V
Special Features Used with C30 Lighting Contactor
Application Motor and Power Control Equipment
Amperage Rating 30
Amps 30
Height 3.7500
Gross Weight 0.310
In Stock Yes
Familystyle Freedom
GTIN 00782116124657
Invoice Description English C30 Accessory
Voltsaccontrol 120
Width 2.0000
Type Mechanically Held Module Kits
Standard Contact Manufacturer
UNSPSC 39121529

Customer Questions & Answers

Ask your questions, share your answers.
We respect your privacy. Specify email and we will send the answer to your address. We never reveal your information or use it to send you not related email.
Write a Review

Review /

Customer Reviews
This product is not rated. Click here to rate this product!

Login for Availability

Eaton / Cutler Hammer