Eaton / Cutler Hammer PSG480F24RM PSG Series Power Supply; 1 Amp, 400 - 500 Volt AC, 24 Volt DC, 3-Phase, DIN Rail Mount

*Images are representative of products listed and may not be actual product.
  • Eaton / Cutler Hammer PSG480F24RM Eaton / Cutler Hammer PSG480F24RM PSG Series Power Supply; 1 Amp, 400 - 500 Volt AC, 24 Volt DC, 3-Phase, DIN Rail Mount
Manufacturer: Eaton / Cutler Hammer
Catalog#: PSG480F24RM
Crescent Part#: 233016
UPC: 786685683607
Your Price:

Product Details

Size: 121 mm Length x 140 mm Width x 117.3 mm Height

Mtbf up to 1,000,000 hours ensures uptime and reliability

All-metal din rail mounting hardware

Heavy duty screw and finger-safe terminals

Conformal coated electronics

Hazardous location class i, division 2 rated models

NEC class II rated model

Buffer module has the stored power needed to keep loads running through a short duration power failure

Product Details:

Eaton / Cutler Hammer 3-Phase PSG series power supply is ideal for communication networks, sensors, PLCs and many other electrical systems. It is designed for 24 VDC control applications. It is enclosed in corrosion resistant aluminum and plastic housing for added safety. It comes with finger-safe terminals to enhance reliability and safety. It has nominal input voltage rating of 400 - 500 VAC and current rating of less than 1 Amp at 47 - 63 Hz. It measures 121 mm x 140 mm x 117.3 mm. It operates at 320-600 VAC and 450-800 VDC input. It has a power rating of 480 Watts. It has internal fuse rating of 3.15Amps at 500 Volts and external fuse rating of 6, 10 or 16 Amps for overvoltage, overcurrent protection.

Power supply start up heavier capacitive loads of maximum of 10,000 micro-farad without losing output capacity. It has surge current rating of 30 Amps to prevent damage caused by inrush current. Residual ripple/peak switching is less than 150m Vpp. Power supply is connected in parallel to increase the output current and features O ring modules to ensure symmetrical capacity. It indicates output voltage availability through green color LED and simplifies troubleshooting. The redundancy modules keep loads up and make to run in the event of a device failure. Power supply has a calculated MTBF of greater than 500,000 hours for reliable performance. It operates at -25 - 80 deg C at 5 to 95% RH, non-condensing and has a storage temperature of -25 - 80 deg C. Power supply is cULus listed and RoHS compliant.

Product Specification

Product Details
Manufacturer Eaton / Cutler Hammer
Catalog# PSG480F24RM
Product Dimensions & Details
Dimensions W:7'' x H:5'' x L:5''
Height 5.00
Length 5.00
Width 7.00
Shipping Information
Ships Ground. Eligible for expedited shipping Yes
Other Information
Amperage Rating 1 Amp
Brand Name Eaton / Cutler Hammer
Application For Communication Networks, Industrial Control Applications, PLCs, Sensors and Many Other Electrical Systems
Item Power Supply
Material Aluminum
Mounting DIN-Rail
Degree Of Protection IP20
Connection Finger-Safe, Fixed Terminal
Conductor Range 18 - 8 AWG Input, 12 - 10 AWG Output
Efficiency 91% At 3 x 400 Volt And 3 x 500 Volt AC
Frequency Rating 47 - 63 Hz
Fuse Rating T3.15 AH/500 Volt, 6/10/16 Amp
Size 121 mm Length x 140 mm Width x 117.3 mm Height
Phase 3
Power Rating 480 Watt
Primary Voltage 400 - 500 Volt AC
Secondary Voltage 24 Volt DC
Sub Brand PSG Series
Temperature Rating -25 to 80 deg C
Standards RoHS Compliance, cULus Listed 508, CSA Certified 22.2 No. 107.1-01, Hazardous Location, Class I, Div. 2, Groups A, B, C, D, IEC, EN, NEC Class 2 Listed
Type General Purpose

Customer Questions & Answers

Ask your questions, share your answers.
We respect your privacy. Specify email and we will send the answer to your address. We never reveal your information or use it to send you not related email.
Write a Review

Review /

Customer Reviews
This product is not rated. Click here to rate this product!

AVAILABILITY

In-Stock
Eaton / Cutler Hammer