Eaton / Cutler Hammer XTCE032C10A Non-Reversing IEC Contactor; 3 Pole, 1 or 3 Phase, 32 Amp, 120 Volt AC

*Images are representative of products listed and may not be actual product.
  • Eaton / Cutler Hammer XTCE032C10A Eaton / Cutler Hammer XTCE032C10A Non-Reversing IEC Contactor; 3 Pole, 1 or 3 Phase, 32 Amp, 120 Volt AC
Manufacturer: Eaton / Cutler Hammer
Catalog#: XTCE032C10A
Crescent Part#: 157897
UPC: 015082772578
Your Price:

Product Details

Panel or DIN rail mounting

IP20 finger and back-of-hand proof

AC and DC controlled contactors in the same compact frame

Low power consumption DC coils

Built-in NO or NC auxiliary contacts to 32 Amp

Plug-in accessories for reduced installation time

Integrated suppressor for DC operated contactors

Non-reversing contactors are most commonly used to switch motor loads in applications where running over current protection is either not required or is provided separately

Product Details:

Eaton 3-Pole Frame C non-reversing IEC contactor has a compact and space saving design that allows easy install XT line of contactor. It measures 3.35 Inch x 1.77 Inch x 3.82 Inch and has a frame size of 45 mm. It has a full load inductive and resistive current rating of 32/45 Amps. It has a one-phase power rating of 3 Hp at 115 Volts, 5 Hp at 200/230 Volts. It also has three-phase power rating of 10 Hp at 200/230 Volts, 20 Hp at 460 Volts and 25 Hp at 575 Volts. It has a built-in 1NO form auxiliary contact with open enclosure. Coil has a full voltage rating of 110/120 VAC at 50/60 Hz. It is mounted on a panel/DIN rail up to current rating of 65 Amps. Contactor is suitable in to switch motor load applications. It has a NEMA rating that attains IP20 deg of protection to finger/back-of-hand. It has an operating temperature rating from 25 - 50 deg C. Contactor is UL listed, CE/CSA/CCC/ATEX certified and meets IEC EN 60947 standards.

Product Specification

Product Details
Manufacturer Eaton / Cutler Hammer
Catalog# XTCE032C10A
Shipping Information
Ships Ground. Eligible for expedited shipping Yes
Other Information
Motor Power 20 hp at 460/480 Volt 3 Phase, 10 hp at 230/240 Volt 3 Phase, 3 hp at 115 Volt 1 Phase, 5 hp at 230/240 Volt 1 Phase, 10 hp at 200/208 Volt 3 Phase, 25 hp at 575/600 Volt 3 Phase
Mounting DIN-Rail/Panel
Item Non-Reversing Contactor
Degree Of Protection IP20
Contact Configuration NO
Connection Screw Terminal
Coil Voltage 120 Volt
Brand Name Eaton / Cutler Hammer
Number Of Poles 3
Phase 1 or 3
Size 3.35 Inch x 1.77 Inch x 3.82 Inch
Amperage Rating 32 Amp
Voltage Rating 120 Volt AC
Standards UL Listed, CE, CSA, CCC, ATEX Certified, IEC EN 60947

Customer Questions & Answers

Ask your questions, share your answers.
We respect your privacy. Specify email and we will send the answer to your address. We never reveal your information or use it to send you not related email.
Write a Review

Review /

Customer Reviews
This product is not rated. Click here to rate this product!

Login for Availability

Eaton / Cutler Hammer