Dimension: 8 Inch Length x 5.250 Inch Width x 5 Inch Height
Housing adjusts in plaster frame to accommodate up to 1-1/2 Inch ceiling thickness
Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams
Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary
GU10 socket for 120 Volt GU10 lamps
Integral T-bar clip snaps onto T-bars - no additional clips required
Bar hangers may be repositioned 90 deg
Score lines allow "tooless" shortening for 12 Inch joists
Cooper Lighting Halo® Recessed shallow housing has 20 gauge CRS with white powder coat finishing for durability. It has a AIR-TITE™ fixture that is used with H3 3-Inch series trims. AIR-TITE™ housing blocks infiltration and exfiltration of air from heated/air conditioned spaces and unconditioned attic areas. It is compatible with GU10 lamps with a voltage rating of 120 Volts. Housing has a voltage rating of 120 Volts, current rating of 0.42 Amps and power rating of 50 Watts. Step down transformer with a voltage rating of 120 Volts converts line voltage to lamp voltage.
Housing features Got Nail!™ bar hangers, Pass-N-Thru™ tool-less shortening of bar hangers, Slide-N-Side™ wire traps. Thermally protected housing removed from plaster frame can be used with 1/2-Inch conduit pryout knockout junction box that contains wiring connector for easy connectivity. It has a 3-Inch nominal square aperture with a 3-3/4 Inch ceiling opening size. It measures 8 Inch x 5.250 Inch x 5 Inch. Housing is UL/cUL listed.
|Amperage Rating||0.417 at (120V)|
|Catalog Description||3" HOUSING NON-IC AIR-TITE SHALLOW CEILING 120V LINE VOLTAGE, GU10|
|Number Of Lamps||1|
|Special Features||Got Nail!Ö bar hangers|
|Standard||UL/cUL Listed - Damp Location;Airtite|
|Type||3" H3 Housing|