Size: 1.060 Inch Diameter x 5.880 Inch Length
Helps protect motors against burnout from overloads
Helps protect motors against burnout from single phasing on three-phase systems
The overload element provides protection against low level overcurrent of overloads and will hold an overload which is five times greater than the amp rating of the fuse for a minimum of ten seconds
Edison Bullet® ECNR Series Dual element time delay fuse helps to protect motors against burnout from 1-Phasing on 3-Phase systems and overloads. Fuse has a time delay of 10 seconds at 500% rated current. It is rated at a voltage of 250 VAC, 150 VDC and current of 100 Amps. Fuse helps to simplifies/improves blackout prevention and provides motor overload, ground fault, short-circuit protection. It measures 1.060 Inch diameter x 5.880 Inch. Fuse is highly recommended for AC power distribution system mains, feeders and branch circuits. Dual-element fuse can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short-circuit/overload protection.
Time delay fuse is ideal for protecting motor, motor branch circuits, transformers, inductive loads, lighting, heating and other non-inductive loads. It features overload element that helps to provide protection against low level overcurrent of overloads and will hold an overload which is five times greater than the current rating of the fuse for a minimum of ten seconds. Fuse is CE/CSA certified and UL listed.
|Dimensions||W:1'' x H:1'' x L:5''|
|Ships Ground. Eligible for expedited shipping||Yes|
|Response Time||10 seconds Minimum At 500% Rated Current|
|Size||1.060 Inch Dia x 5.880 Inch Length|
|Amperage Rating||100 Amp|
|Application||For AC Power Distribution System Mains, Feeders, Branch Circuits, Motors and Motor Branch Circuits, Transformers and Inductive Loads, Lighting, Heating and Non-Inductive Loads|
|Interrupt Rating||200 Kilo-Amp RMS Symmetrical|
|Voltage Rating||250 Volt AC|
|Type||ECNR Series, Current-Limiting|
|Standards||CE Certified, UL Listed, Standard 248-12, Guide JDDZ, File E162363, CSA Certified, C22.2 No. 248.12, Class 1422-02, File 700489|