Size: 2.920 Inch Depth x 3.500 Inch Height
Used on load center
Fluke Common trip clamp meter with temperature, LCD display can easily accommodate conductor diameter size of 1.77 inches. It has voltage rating of 600 Volts and current rating of 40/400/1000 Amps. It measures 2.920 Inch x 3.500 Inch. It features automatic polarity and optional PC interface capability for convenience. It has a resistance of 999.9 Ohm. Thermal magnetic meter is used to measure total harmonics distortion, AC/DC voltage rating up to 600 Volts, AC current rating up to 1000 Amps, resistance, frequency, temperature rating of -50 to 300 deg C. It has an accuracy of +/- 1.0% AC current basic.
Data hold clamp meter features auto power off, audible continuity and an indicator to indicate low battery. True-rms sensing meter measures active, reactive and apparent power with dual-display power factor readout. Peak hold meter features large, easy to read LCD display with backlight. It includes carrying case, test leads, batteries, thermocouple and manual. It has voltage overload protection for all functions up to 600 VAC/VDC with visi-trip indicator. Clamp meter is UL listed.
|Catalog Description||The Amprobe ACD-40 provides a simple and effective way to verify if the electrical system is affected by harmonics. Add on troubleshooting capabilities with the ACD-40PQ data-logging feature or get complete power analysis with the ACD-41PQ. Increase measuring efficiency with an optional PC interface kit.|
|Jaw Size||"1.77"" (45 mm) jaw opening"|
|Safety Rating||category III installations up to 600V|
|Ships Ground. Eligible for expedited shipping||Yes|
|Special Features||True RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, where the current or voltage has a sinusoidal or nonsinusoidal waveform|
|Voltage Rating||(DC) voltage and AC voltage to 600 volts (V)|