Dimension: 6.700 Inch x 9.500 Inch x 13 Inch
Test voltages up to 10 kV provides solutions for all applications
Cat III 1000 Volt, Cat IV 600 Volt safety rating
Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 Volt AC/DC for increased user safety
Selectable test voltages in 50 Volt steps from 250 - 1000 Volt and 100 Volt steps above 1000 Volt
Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
Long battery life gives the user over 750 tests between charges
Timer settings up to 99 minutes for timed tests
Fluke 5 kilo-Volts Insulation tester is ideally designed for testing voltages up to 10 kilo-Volts, automatic calculation of dielectric absorption and polarization index. It provides selectable test voltages in 50 Volts steps from 250 - 1000 Volts and 100 Volts steps above 1000 Volts. It also measures capacitance, leakage current and resistance measurements up to 2 tera-Ohm. The voltage breakdown detection feature alerts the user that voltage is present and gives the voltage reading up to 600 Volts AC/DC for increased user safety. It includes 75 mm x 105 mm large digital/analog LCD display for easy viewing. It has ramp function for breakdown testing and guard system to eliminate the effect of surface leakage current on high-resistance measurements. It uses 12 Volts lead-acid rechargeable battery and has longer battery life to help user to perform over 750 tests between charges. It has the capacity to store measurements up to 99 memory locations with each location assigned a unique, user defined, label for easy recall.
Insulation tester measures test voltages at 250/500/1000/2500/5000/10000 VDC providing an accuracy of -0 %, +10 % at 1 milli-Amps load current. It measures insulation resistance greater than 200 kilo-Ohm at each test voltages. It calculates insulation resistance from 200 kilo-Ohm - 5/10/20/50/100/200 giga-Ohm at 250/500/1000/2500/5000/10000 VDC providing an accuracy of +/-5%. It also calculates insulation resistance from 5 - 50/10 - 100/20 - 200/50 - 500 giga-Ohm at 250/500/1000/2500 VDC and from 100/10 giga-Ohm - 1/2 tera-Ohm at 5000/10000 VDC providing an accuracy of +/-20%. It also measures insulation resistance less than 50/100/200/500 giga-Ohm at 250/500/1000/2500 VDC and less than 1/2 tera-Ohm at 5000/10000 VDC. It measures leakage current from 1 nano-Amps - 2 milli-Amps providing an accuracy of +/-5% + 2 nano-Amps and also measures capacitance from 0.01 uF - 15.00µF providing an accuracy of +/-15% rdg + 0.03µF.Insulation tester has timer range from 0 - 99 minutes.
It offers live circuit warning from 30 - 660 Volts AC/DC at 50/60 Hz with an accuracy of +/-15% + 2 Volts. It has bar graph range from 0 - 1 tear-Ohm, 2 milli-Amps maximum induced AC mains current rejection, 5 seconds/µF charging rate for capacitive load and 1.5 seconds/µF discharge rate for capacitive load. It operates at a temperature of -20 - 50 deg C and has storage temperature of -20 - 65 deg C. It provides input overload protection at 1000 VAC. Tester measures 6.7000 Inch x 9.500 Inch x 13 Inch. It has IP40 enclosure sealing and is electromagnetic compatible with EN 61326. Tester meets CAT III 1000 Volts and CAT IV 600 Volts safety standards. Tester is CSA and CE certified.
|Application||Insulation resistance tester|
|Catalog Description||Digital insulation testing up to 10kV. The redesigned Fluke 1550C insulation resistance tester, offers digital insulation testing up to 10kV, making them ideal for testing a wide range of high voltage equipment including switch gear, motors, generators an|
|Display||75 mm x 105 mm|
|Ships Ground. Eligible for expedited shipping||Yes|