Sign in or register to view your pricing and inventory.

Fluke I800 AC Current Clamp Probe; 600 Volt AC/DC RMS, 800 Amp rms

  • Fluke I800 Fluke I800 AC Current Clamp Probe; 600 Volt AC/DC RMS, 800 Amp rms
  • Fluke I800 AC Current Clamp Probe; 600 Volt AC/DC RMS, 800 Amp rms
Manufacturer: Fluke
Mfr. #: I800
Item #: 200291
UPC: 095969401227
Availability:
Generally ships in 7-10 business days.

Your Price

$345.9900 / each

Product Details

Rugged positive action design

100 Micro-Amp Lowest measurable current

100 Micro-Amp to 800 Amp RMS continuous current range

Non-Destructive Current: 1500 Amp rms

Detailed Description: Fluke Current clamp probe is ideal for multimeters, recorders and safety testers for accurate non-intrusive AC current measurements. It comes in rugged positive action design that accommodates conductor size of 54 mm Diameter for good conductivity. Probe is suitable for digital multimeters that accept shrouded 4 mm banana plugs. It can measure continuous current rating of 100 milli-Amps to 800 Amps. Probe is designed to measure voltage rating of 600 Volts at a frequency rating of 30 Hz - 10 kilo-Hz. It gives precise measurements on maximum non-destructive current of 1500 Amps. Probe has a basic reading accuracy of +/- 1%. It has a output cable 1.6 m long. Probe has a conversion factor of 1000:1 for easy calculation.

Product Specification

Accuracy Plus/Minus 1 PCT Of Reading
Amperage Rating 1.5k
Brand Fluke
Catalog Description AC Current Clamp Probe, Voltage Rating: 600 VRMS/VDC, Amperage Rating: 1500 AMP RMS (50/60 HZ) Maximum Non-Destructive, Measuring Range: 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current, Accuracy: Plus/Minus 1 PCT Of Reading, Diameter: 54 MM Maximum Conductor, Length: 1.6 MR Output cable, Impedance: Load: Less Than Or Equal To 20 OHM, Operating Temperature: -10 To 55 DEG C, Storage Temperature: -40 To 70 DEG C, Operating Humidity: 15 - 85 PCT (Non-Condensing), CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3
Diameter 54 MM Maximum Conductor
GTIN

00095969401227

Height 10.5000
Height Unit IN
Item Status A
Length 1.6 MR Output cable
Length UOM IN
Measuring Range 800 AMP RMS Nominal Current, 100 MILAMP - 800 AMP RMS At Continuous Current
Mfr. # I800
Ships Freight No
Ships Ground. Eligible for expedited shipping Yes
Special Features The model i800 is a clamp-on AC current probe designed to extend the current measuring capability of a digital multimeter to 800 AMP AC; The clamp is compatible with a DMM that accepts 4 MM shrouded banana plugs and has an AC milliamp range; Measures AC current from 100 MILAMP - 800 AMP RMS; 30 HZ - 10 KHZ frequency range; Accepts up to 54 MM diameter conductor size; 1000:1 conversion factor for easy calculation; Rugged positive action design; Lowest measureable current: 100 MILAMP; Useable frequency: 30 HZ - 10 KHZ (-3 DB); Output level(s): 1 MILAMP/A; Lead connector: Shrouded banana plugs; Phase shift at 2 KHZ: Plus/minus 1 DEG typical; Bandwidth: 30 HZ - 10 KHZ (-3 DB); Overload conditions: Operation above 1200 AMP should be limited to frequencies below 1 KHZ; Duty cycle: 1500 AMP at 50/60 HZ for 1 HR, 33 PCT duty cycle (20 MINT On, 40 MINT Off); Pollution degree: 2
Standard CAT III 600 V Rated, C/US CSA Certified, CE Certified, N10140 Confirmed, EN 61010-1: 2001, EN 61010-2-032: 2002, EN 61010-031: 2002, EN 61326 :1998 And A1, A2 And A3
Type AC Current Clamp Probe
UNSPSC 41111905
Voltage Rating 848.528//600
Width 3.0000
Width UOM IN