TRMS, 3-phase motor rotation
Sturdy ABS construction
Protective rubber boot deluxe leadset with removable probe tips
Compatible with snap-on heads for maximum versatility
Overload protection on all ranges
Built-in tilt stand
Low battery indicator
Ideal Test-Pro® Digital multimeter is designed to test and measure electrical quantities in high-tech commercial/industrial circuit. It measures AC/DC voltage between 200 milli-Volts to 600 Volts. It is design to check AC/DC current rating from 2 Amps. It features options like smart data hold, relative mode and min/max for accurate measurement. Auto power off option helps to extend battery life. It comes with an indicator to alert the user if battery life is running low. It has backlit LCD display for operating device in low light environment.
Multimeter has non-contact voltage detection technique for safer operation on open circuit terminals. It measure 4.0 Inch x 7.5 Inch x 2.5 Inch. Multimeter has 3-1/2 inches digit LCD that displays 2000 count for maximum value readout. Multimeter has two fast acting fuse for protecting device from overload voltages.
True RMS sensing multimeter ensures accurate, error free values. It is used to measure 200 Ohms - 200 mega-Ohms circuit resistance, 20µF - 200 mF capacitance and 10 Hz - 100 kHz frequency. Diode test mode in multimeter tests for general purpose germanium, silicon and power diodes. It is powered by 9 Volt batteries. It operates at temperature of 0 - 50 deg C and stored at temperature of -20 to 60 deg C. Multimeter has CAT III-600V rated design for safer operation. Multimeter is UL listed.
|Dimensions||W:7'' x H:2'' x L:12''|
|Ships Ground. Eligible for expedited shipping||Yes|
|Display||2000 Count LCD|
|Resistance||200 Ohm, 2/20/200 kilo-ohm, 2/20 mega-ohm|
|Power Source||200 Hour Typical 9 Volt NEDA 1604 Type, JIS006P, IEC6F22 Battery|
|Size||11-1/4 Inch Length x 6-3/4 Inch Width x 2 Inch Height|
|Accuracy||2% AC Voltage, 1.2% DC Voltage, 3% Current, 1.0% Resistance, 4.0% Capacitance, 0.50% Frequency|
|Amperage Rating||2 Amp AC/DC|
|Application||For 3-Phase Motor Rotation|
|Voltage Rating||200 Milli-Volt, 2000/20/200/600 Volt AC, 200/2000 Milli-Volt/20/200/600 Volt DC|
|Standards||CAT III-600 V, UL 61010 Listed, CE, C 12966|
|Temperature Rating||0 to 50 deg C|