King Electrical KCV2410 83" Radiant Cove Heater with Convection Heat; 240 Volt, 935 Watt

*Images are representative of products listed and may not be actual product.
  • King Electrical KCV2410 King Electrical KCV2410 83" Radiant Cove Heater with Convection Heat; 240 Volt, 935 Watt
Manufacturer: King Electrical
Catalog#: KCV2410
Crescent Part#: 4105
UPC: 093319118368
Crescent truck delivery only ?
Your Price:

Product Details

Long life, quiet running radiant heat / convection heat

Thick,extruded aluminum front panel with a powder-coated high temperature, textured finish

Ribbed front for maximum surface radiation

Junction box at each end

7/8" diameter knockouts for 1/2" conduit

Open-back design for maximum convection airflow

Easy surface-mount installation

Wall thermostat recommended (Single Pole Kit: KCVT-1 ; Double Pole Kit: KCVT-2)

Product Details:

The cove heater is primarily a radiant heater but also produces convection heat by heating the air similar to a baseboard. By combining the quick comfort of radiant heating along with the sustained warmth of convection heat, warm air is uniformly dispersed throughout the room. The cove heater is mounted a minimum of 4 in. from the ceiling, keeping it out of the way and eliminating any furniture placement problems. It is much lower in surface temperature than a baseboard fan heater, making it a very pleasant for of heat similar to older ceiling cable heating systems. With no moving parts, this heater is quiet and maintenance-free. Typical uses are day care centers, assisted living housing, housing developments, laundry rooms, bathrooms, bedrooms, living rooms, and shops. Use any place a heater is needed where placement too low on the wall is inappropriate or soft heat is preferred. King recommends using a wall thermostat (Single Pole Kit: KCVT-1 ; Double Pole Kit: KCVT-2).

Product Specification

Product Details
Manufacturer King Electrical
Catalog# KCV2410
Product Dimensions & Details
Dimensions W:83.0''
Width 83.00
Shipping Information
Ships Freight Yes
Other Information
Model KCV2410
Design Extruded aluminum ribbed front panel, 22 gauge electrogalvanized steel wall can, junction boxes on ends, aluminum metal tubing containing nichrome wire embedded in magnesium oxide powder
Depth (Inches) 3.125
Country of Origin USA
Color/Finish Almond baked enamel
Connection 14 AWG Wire
Enamel Finish Almond
Dimensions 83 IN Length X 3-1/4 IN Width X 4 IN Height
Catalog Number KCV2410
BTU Heat Rating (BTU) 3191.0
Btu Rating 3191
Catalog Description King Heaters KCV2410 Cove Heater, 3191 BTU, 22 Gauge Electrogalvanized Steel Wall Can, Extruded Aluminum Front Panel, Connection: 14 AWG Wire, 83 IN Length X 3-1/4 IN Width X 4 IN Height, 240 V, Wattage: 1000 WTT, Finish: Baked Enamel Wall Can, Textured Front Panel, 3.9 AMP, 1 Phase, UL E41422, ETL 473-2735, CSA Certified
Select Code FANS/HEATING/VENTING
Oscillation No
Portable Heater No
ACLI Safety Plug No
Amperage (Amps) 3.9
Anti-Freeze No
Indoor or Outdoor Indoor
In Stock Yes
Housing Material 22 Gauge Electrogalvanized Steel Wall Can, Extruded Aluminum Front Panel
Heating Area (Sq. Feet) 93.5
Heater Design Other
Heater Power Rating (Watts) 935.0
Gross Weight 11.000
Fuel Type Electric
EU RoHS Indicator N
GTIN 00093319118368
Invoice Description English COVE HTR 240V 1000W 83"
Voltage (Volts) 240.0
Video Clip www.youtube.com/watch?v=_KpIN6ROtuc
Width (Inches) 83.0
Type KCV Series Cove Heater
Standard UL E41422, ETL 473-2735, CSA Certified
Special Features Radiant heat; Convection heat; Quiet running; Ribbed front for maximum surface radiation; Junction box at each end; The heater shall have a 32 CU-IN junction box at both ends, furnished 7/8 IN diameter knockouts back and top to facilitate 1/2 IN conduit; Open-back design for maximum convection airflow; No moving parts; Long life elements; Easy surface-mount installation; Wall thermostat recommended; Produces convection heat by heating the air similar to a baseboard; By combining the quick comfort of radiant heat along with the sustained warmth of convection heat, warm air is uniformly dispersed throughout the room; The cove heater is mounted a minimum of 4 IN from the ceiling, keeping it out-of-the-way and eliminating any furniture placement problems. It is much lower in surface temperature than a baseboard or fan heater, making it a very pleasant form of heat similar to older ceiling cable heating systems; With no moving parts this heater is quiet and maintenance-free; Use any place a heater is needed where placement too low on the wall is inappropriate or soft heat is preferred; The heaters shall be constructed of extruded aluminum with a maximum cross section thickness of 0.962 IN; The heater surface shall have a sawtooth profile to increase radiating surface area; The heater shall be open on top and bottom for maximum convection heating of room air; The heater shall be powder-coated with high temperature-resistant paint; Heater elements shall be of Ni-chrome wire embedded in magnesium oxide powder enclosed and sealed in aluminum metal tubing; Heater elements shall have wattage density of approximately 150 WTT per lineal foot; 1 YR limited warranty

Customer Questions & Answers

Ask your questions, share your answers.
We respect your privacy. Specify email and we will send the answer to your address. We never reveal your information or use it to send you not related email.
Write a Review

Review /

Customer Reviews
This product is not rated. Click here to rate this product!

Login for Availability

King Electrical