Locate, test and measure coaxial, data (RJ45) and telephone (RJ11) cables
Detect, identify and test Power over Ethernet (PoE)
Measure paired-conductor cables up to 1, 500 ft. (457 m) with accuracy of up to ±(5% and 1 ft./0.3 m).
Perform active network (ethernet) testing - detect capabilities and connection speeds
Locate and identify cables with location ID remotes, test-n-Map ID remotes, link light and tone generator
Test and identify location in one step (two-end testing) with test-n-map ID remotes (RJ45 and RJ12 ports) supports up to 8 remotes
Multiple style (4 cadences) tone generator capable of sending a tone on a single conductor, a conductor pair or over all conductors; kit includes required PROBEplus tone tracing probe (VDV500-060)
Visually identify a hub or switch and locate cable runs with Link Light
Klein VDV Commander test and tone kit includes one VDV Commander™ tester, one PROBEplus tone tracing probe, one Test-n-Map™ ID remote, 20 LanMap™ RJ45 location ID remotes, 20 CoaxMap™ F-Connector location ID remotes, one test cable from micro USB to USB A, one 9-Inch test cable for universal RJ12 jumper, one 9-Inch test cable for RJ45 jumper, one coax adapter for F-F female barrel, six AA alkaline batteries and a carrying case. It uses test-n-map ID remotes for single-end cable testing or complete two-end cable testing and to test or identify location in one step. It features multiple style tone generator that is capable of sending a tone on a single conductor, a conductor pair or over all conductors. Kit includes required PROBEplus tone tracing probe.
Test and tone kit is designed for locating, testing and measuring coaxial, data and telephone cables. It identifies wiring faults including miswire, open, short, split-pair, reverse-pair and verify shielding. It measures cable length or distance to a fault using time domain reflectometry technology and also measures paired-conductor cables up to 1500 ft with an accuracy of up to +/-5% and 1 ft per 0.3 m. Kit performs active network Ethernet testing to detect capabilities and connection speeds. It visually identifies a hub or switch and locate cable runs with link light. Kit locates and identifies cables with location ID remotes, test-n-map ID remotes, link light and tone generator. Kit also detects, identifies and tests the presence of power over Ethernet.
|Catalog Description||CommanderÖ Tester with Test-n-Map Remote Kit, Locate, test and measure coaxial, data (RJ45) and telephone (RJ11) cables|
|Ships Ground. Eligible for expedited shipping||Yes|
|Special Features||Accuracy/Measurement Resolution, Active Ethernet Detects Link Speed and Capabilities 10/100/1000base-T half or full duplex. Can link to network at 10/100base-T; Customizable Setup; Imperial or Metric Results; Multiple Languages: English/Spanish/French; Single-End Cable Testing|