Size: 1.750 Inch Width x 1.220 Inch Depth x 4.130 Inch Height
Universal light control switches incandescent, CFL, LED and fluorescent ballasts using relay technology
Automatic On/Automatic OFF operation for seamless energy management
Low-Profile design eliminates an obtrusive "scanning device" look. Elegant styling compliments any interior and coordinates with Leviton’s popular line of Decora® wiring devices
900 sq ft of coverage suitable for bathrooms, basements, garages, utility rooms and a variety of other residential areas
Segmented fresnel lens provides optimum sensitivity and performance, with an extensive "minor motion" area where even slight body movements will be detected
Four optional manual adjustments for delayed-OFF time settings maximize energy savings 30 sec (for walking test), 10 min, 20 min and 30 min
Unit can be used for 120 Volt lighting. Compatibile with both electronic and magnetic ballasts or 1/2 hP loads
Leviton Decora® 1-Pole Occupancy detector in white color has an advanced passive infrared relay technology that offers manual ON operation. It offers 180 deg field-of-view and provides an enhanced coverage range of 900 sq.ft. It offers a convenient three-way operation for multi-controlling options. It features segmented lens for maximum sensitivity and performance. It comes with an extensive minor motion area action, where even minimal movements of the body are detected. It is rated at 120 VAC, 15 Amps at 60 Hz.
Detector has a low profile that complements Decora® wiring devices with an added elegance to your decor. It has a push-button type of actuator for convenient manual ON/OFF switching. It operates at 20 - 90% non-condensing humidity/0 to 40 deg C temperature. Detector is suitable for 120 Volts lighting, electronic/magnetic ballasts, 1/2 hp loads, LED, CFL and incandescent loads. It is used in bathrooms, basements, garages, utility rooms and a variety of other residential areas.
Detector offers four manual adjustable, delayed-OFF time settings at 30 seconds - 30 minutes for optimal energy savings. It has an LED indicator light that verifies active motion detection of the sensor. It is standard wall box mountable and does not require neutral wire connection for retrofit/new construction applications. It measures 1.750 Inch x 1.220 Inch x 4.130 Inch. It is also included with ivory/light almond change kits. Detector is UL listed, cUL certified and meets California title 24 2005-energy code standards.
|Catalog Description||Incandescent Relay Occupancy Sensor, 1800-Watt, Single Pole or 3-Way|
|Environmental Conditions||Operating Temperature Range (0 to +40 DEG C);Humidity (20% to 90% Non-Condensing)|
|Size||4.13 H x 1.75 W x 1.22 D|
|Special Features||Single Pole or 3-Way when Used with IPV0R Sensor Remote or with VP0SR Vizia + Switch Remote, For use with LED, CFL, Incandescent, Fluorescent Ballast or Motor Loads, Ideal for Higher Power Lighting and Motor Loads, Neutral Required for Installations in ne|
|Standard||UL Listed;CA Title 20 Code Compliance|