Size: 2.030 Inch Width x 2.150 Inch Depth x 3.750 Inch Height
50 deg C maximum temperature rise at full rated current
Overload UL20 test: 100 cycles of overload at 4.8 times rated current, overload UL508 test: 50 cycles of overload at 6 times rated current
Nickel plated brass yoke, silver-cadmium 0.031 Inch thick contacts, nickel plated brass 10-32 terminal screws
T1, T2, T3, L1, L2 and L3 terminal identification marked on back of device
Ratings are permenantly marked on device
Nickel plated brass strap material
Internal chamber barriers prevent flash-over between phases
Leviton 3-Pole 3-Phase Industrial grade AC motor starter switch is engineered to deliver safe and reliable control of a wide range of motor loads. It has a voltage rating of 600 VAC and current rating of 30 Amps. It has a motor power rating of 3 hp at 120 VAC, 7-1/2 hp at 240 VAC, 15 hp at 480 VAC and 20 hp at 600 VAC. It is designed to withstand a dielectric voltage of 2200 Volts for one minute. It has a short circuit rating of 10000 RMS symmetrical Amps at maximum voltage 600 VAC when protected by a 30 Amps time delay fuse.
Switch's base, cover and short toggle is made of PBT polyester material to offer resistance against impact, chemicals, temperature, tracking and arcing. It includes nickel-plated brass screws and bushings for quick installation. It is featured with a cam-driven mechanism to increase fast-make/slow-break. It is provided with silver-alloy contacts for superior conductivity and service life. It measures 2.030 Inch x 2.150 Inch x 3.750 Inch. It has external clamps to accommodate 10 - 8 AWG back and side wiring. Switch features T1, T2, T3, L1, L2 and L3 marked terminals on back for easy identification.
Switch is provided with an internal insulating barrier between the terminals to offer isolation between the phases. It has a non-corrosive, durable nickel-plated brass mounting yoke with permanently marked with catalog number, amperage, voltage and horsepower ratings for easy identification. Switch features an oversized toggle for easy turn ON/OFF. Switch with triple-drive nickel-plated terminal screws enable tightening to accurate torque ranges. It has 6000 cycles of endurance for inductive motor type load. It has 50 cycles of overload protection at 6 times full rated current.
Switch operates at a temperature range of -40 to 60 deg C and has a temperature rise of 50 deg C at full rated current. It has a torque range of 20 Inch lb. It has UL94 V-0 flammability rating to withstand harsh environment conditions. Switch meets WD1 & WD6 NEMA, C-73 ANSI, File E63969 UL 508, File #E63969 cUL per CSA C22.2 No. 111 and 057 NOM standards.
|Dimensions||W:3'' x H:4''|
|Ships Ground. Eligible for expedited shipping||Yes|
|Item||AC Motor Starting Switch|
|Material||Thermoplastic Polyester Face, Toggle And Base|
|Motor Power||3 hp at 120 Volt AC, 7-1/2 hp at 240 Volt AC, 15 hp at 480 Volt AC, 20 hp at 600 Volt AC|
|Dielectric Voltage||2200 Volt For 1 min|
|Environmental Conditions||Flammability Rated UL94 V-0|
|Connection||Back and Side Wired|
|Number Of Poles||3|
|Operator Type||Manual Short Toggle|
|Operating Cycles||6000 Cycles Inductive Motor Type Load|
|Size||2.030 Inch Width x 2.150 Inch Depth x 3.750 Inch Height|
|Application||For Industrial Applications|
|Amperage Rating||30 Amp|
|Voltage Rating||600 Volt|
|Wire Size||10-8 AWG|
|Standards||NEMA WD-1, WD-6, ANSI C-73, UL508: File #E63969, cUL Per CSA C22.2 No. 111: File #E63969, NOM 057|
|Torque Range||25 Inch-lb|
|Temperature Rating||-40 to 60 deg C|