A non-conductive fiberglass step ladder extra-heavy duty capable of supporting 300 lb
Equipped with Da Boot for slip resistant footing, SHOX system and the ProTop
A non-conductive structural molded top with hardware tray, paint can holder, handyman's tool slots, pipe holder, curved front of top provides leg comfort and convenient magnet to secure small steel parts
Louisville Type IA fiberglass step ladder features Da Boot that offers slip resistant footing. Ladder has spreader braces inside fiberglass rails that help to protect braces from getting hooked or abused during transit. It has double-rivet step construction that is secured with six, large headed, semi-tubular steel rivets for extreme strength. Ladder features vertically mounted U-shaped wide back braces that are spaced on one foot intervals to offer maximum stiffness. Ladder has 3-Inch wide rung and base spreads up to 28 inches. Ladder measures 4 ft high. It has base width of 18-7/8 Inch and base bottom width of 19-9/16 Inch.
Ladder is multifunctional to increase the productivity. It includes recessed tray that provides area to protect hardware falling from the top. Ladder has suitable recessed tray that holds quarter/half/full gallon paint buckets. It includes two separate drill slots that forms variety of convenient options while using the paint bucket holder. Ladder features screwdrivers/pliers that has many slots with durable protop to hold all the needed tools. It has curved surface on front of top that offers leg comfort. Ladder includes groove across the top that keeps pipes and 2x4 holder from getting away from user.
Ladder has magnet tray that easily protects metallic hardware and tools. It has nonconductive full channel rails that are covered with a polyester veil for longer life. Ladder includes reinforced bottom back brace that offers extra strength to the bottom of the ladder. It has aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Ladder includes molded-in slots that helps to keep tools close at hand.
Ladder includes aluminum angle feet with slip resistant rubber tread on all four legs to offer better stability and rubber thread can be replaceable. It has rugged nonconductive structural molded top that is highly durable. It contains all the necessary warning, caution, danger and instruction labels, model/duty rating label. Ladder is CSA certified and meets OSHA/ANSI standards.
|Ships Ground. Eligible for expedited shipping||Yes|
|Load Capacity||300 lb|
|Ladder Height||4 ft|
|Rung Size||3.000 Inch|
|Base Spread||28.000 Inch|
|Approximate Cubic Feet Per Unit||3.6 Cubic-ft|
|Bottom Width||19-9/16 Inch|
|Standards||OSHA, ANSI A14.5, CSA|