Size: 2.170 Inch Length x 2.250 Inch Width x 2.500 Inch Height
Flexible design - can be used as a tap, splice, or dead end connector
Panduit PCSB-S Series 2-Port Multi-tap connector has 350 kcmil - 10 AWG stranded aluminum/copper conductor for high conductivity. It has high strength extruded aluminum body to provide premium electrical and mechanical performance. It has clear PVC insulation to eliminate the need for taping and allows visual inspection of the complete conductor insertion. Each port of the connector is pre-filled with oxide inhibitor for reduced oxidation.
Connector has wide wire-ranging capability that minimizes inventory requirements. Connector measures 2.170 Inch x 2.250 Inch x 2.500 Inch and has a hexagonal size of 0.3125 Inch. It has two isolated mounting holes at each end to facilitate direct mounting using 0.25-Inch bolts. It has plated steel/aluminum setscrew to provide high strength and durable electrical contact between conductor and connector. It has a flexible design and one side entry for convenience. Connector is UL/CSA/RoHS compliant.
|Ships Ground. Eligible for expedited shipping||Yes|
|Material||High Strength Aluminum Alloy|
|Mounting Hole Spacing||1.000 Inch|
|Conductor Size||350 KCMIL-10 AWG Stranded (Aluminum/Copper)|
|Number Of Ports||2|
|Size||2.170 Inch Length x 2.250 Inch Width x 2.500 Inch Height|
|Hex Size||5/16 Inch|
|Voltage Rating||600 Volt|
|Type||PCSB-S Series, 1-Sided Entry|
|Standards||UL Listed, CSA Certified, RoHS Compliant|
|Temperature Rating||90 deg C|
|Torque Rating||275 Inch-lb|