0 - 0.1 Milli-Amp, Typical 0.1 Micro-Amp OFF-state current at 25 deg C
Pepperl & Fuchs Inductive sensor features PNP switching element with NO connection. It is rated to operate at a distance of 0.8 mm with an assured distance of 0 - 0.648 mm. The switching state is indicated with yellow LED. The 4-mm diameter stainless steel housing has sensing face made of PC for high strength and durability. It operates at a voltage of 10 - 30 Volts and has current rating of 0 - 200 milli-Amps at 0 - 3000 Hz. It has reduction factor of 0.45 for aluminum, 0.4 for copper and 0.77 for 304 material.
Sensor has typical 5% hysteresis and less than 3 Volts voltage drop. It requires a no-load supply current of 10 milli-Amps. It has 0.14 sq.mm cross-section core and 2-m durable PVC cable connector type. It can be flush mounted for easy installation. Inductive sensor is reverse polarity protected for optimum safety and operates at a temperature of -25 to 70 deg C. It is IP67 rated for use in hazardous environments. Inductive sensor is cULus/cCSAus listed.
|Ships Ground. Eligible for expedited shipping||Yes|
|Material||1.4305/AISI 303 Stainless Steel Housing, Polycarbonate Face, PVC Cable|
|Connection||2 m Cable|
|Degree Of Protection||IP67|
|Brand Name||Pepperl & Fuchs|
|Sensing Distance||0.8 mm|
|Size||4 mm Dia x 25 mm Length|
|Amperage Rating||0 - 200 Milli-Amp|
|Frequency Response||0 - 3000 Hz|
|Voltage Rating||10 - 30 Volt|
|Temperature Rating||-25 to 70 deg C|
|Standards||cULus Listed, cCSAus Certified, CCC Certified, EN/IEC 60947-5-2:2007, CE Compliant|