0 - 0.5 Milli-Amp, Typical 0.1 Micro-Amp OFF-state current at 25 deg C
Pepperl & Fuchs Basic Series Inductive sensor features PNP switching element with NO connection. It is rated to operate at a distance of 2 mm with an assured distance of 0 - 1.62 mm. The switching state is indicated with yellow multihole-LED. It offers enhanced operating distance for better performance. It offers extended range for better performance. The 8-mm diameter nickel-plated brass housing has sensing face made of LCP for high strength and durability. Sensor operates at a voltage of 10 - 30 Volts and has current rating of 0 - 100 milli-Amps at 0 - 3000 Hz. It has reduction factor of 0.45 for aluminum, 0.4 for copper and 0.75 for 304 material.
Sensor has typical 5% hysteresis and less than 3 Volts voltage drop. It delivers DC output and requires a no-load supply current of less than 15 milli-Amps. Inductive sensor has cross section of 0.14 sq.mm and four-pin M12 x 1 connector. It can be flush mounted for easy installation. Inductive sensor is reverse polarity protected and offers pulsed short-circuit protection. It operates at a temperature of -25 to 70 deg C. It is IP67 rated for use in hazardous environments. Inductive sensor is cULus/cCSAus listed.
|Ships Ground. Eligible for expedited shipping||Yes|
|Amperage Rating||0 - 100 Milli-Amp|
|Brand Name||Pepperl & Fuchs|
|Material||Brass Housing, Liquid Crystal Polymer Face|
|Degree Of Protection||IP67|
|Size||M8 x 1 Thread, 35 mm Length|
|Sensing Distance||2 mm|
|Indicator||Yellow Multihole LED|
|Frequency Response||0 - 3000 Hz|
|Standards||cULus Listed, cCSAus Certified, CCC Certified, EN/IEC 60947-5-2:2007, CE Compliant|
|Temperature Rating||-25 to 70 deg C|
|Voltage Rating||10 - 30 Volt|