Indicator for operating display and switching state
0 - 1600 Milli-Amp momentary current
Pepperl & Fuchs 2-Wire Inductive sensor features AC switching element with NO connection. It is rated to operate at a distance of 5 mm with an assured distance of 0 - 4.05 mm. The switching state is indicated with yellow multihole-LED. It offers enhanced temperature range for better performance. The 18-mm diameter nickel-plated brass housing has sensing face made of PBT for high strength and durability. Sensor operates at a voltage of 20 - 235 Volts and has current rating of 5 - 200 milli-Amps at 25 Hz. It has reduction factor of 0.2 for aluminum, 0.15 for copper and 0.7 for 304 material.
Sensor has less than 8 Volts voltage drop. It has typical 6% hysteresis and delivers AC output. It requires a no-load supply current of less than 20 milli-Amps. Inductive sensor has three-pin M12 x 1 connector and can be flush mounted for easy installation. Inductive sensor operates at a temperature of -25 to 70 deg C. It is IP67 rated for use in hazardous environments. Inductive sensor is cULus/cCSAus listed.
|Ships Ground. Eligible for expedited shipping||Yes|
|Material||Brass Housing, PBT Face|
|Degree Of Protection||IP67|
|Connection||3-Pin, M12 x 1|
|Brand Name||Pepperl & Fuchs|
|Sensing Distance||5 mm|
|Size||M18 x 1 Thread, 70 mm Length|
|Amperage Rating||5 - 200 Milli-Amp|
|Frequency Response||25 Hz|
|Voltage Rating||20 - 253 Volt|
|Standards||EN/IEC 60947-5-2:2004, CE Compliant|
|Temperature Rating||-25 to 70 deg C Ambient|