Size: 27 mm Length x 10 mm Width x 7.2 mm Height
0 - 0.5 Milli-Amp, Typical 0.1 Micro-Amp OFF-state current at 25 deg C
Pepperl & Fuchs Inductive sensor has PNP switching element with NO function. It is rated to operate at a distance of 4 mm with an assured operating distance of 0 - 3.24 mm. Housing and sensing face are made of PPS material for high strength with durability. Sensor operates at a voltage of 10 - 30 Volts and current of 0 - 100 milli-Amps at a switching frequency of 0 - 1000 Hz. It has reduction factor of 0.4 for aluminum, 0.3 for copper and 0.7 for 304 material. It measures 27 mm x 10 mm x 7.2 mm.
The thee-wire configuration sensor has less than 3 Volts voltage drop. It has typical 5% hysteresis at a typical off state current of 0.5 milli-Amps and gives DC output polarity with yellow LED indicator. Sensor has 0.14 sq.mm core and 2 m PVC cable connection type. It has non-flush installation. Sensor is pulsed short circuit protected and reversed polarity protected for added safety. It operates at a temperature of -25 to 70 deg C. Inductive sensor is IP67 rated for use in hazardous locations. Sensor is cULus/cCSAus listed and CCC certified.
|Ships Ground. Eligible for expedited shipping||Yes|
|Material||Polyphenylene Sulfide Housing and Face, PVC Cable|
|Degree Of Protection||IP67|
|Connection||2 m Cable|
|Brand Name||Pepperl & Fuchs|
|Size||27 mm Length x 10 mm Width x 7.2 mm Height|
|Sensing Distance||4 mm|
|Amperage Rating||0 - 100 Milli-Amp|
|Frequency Response||0 - 1000 Hz|
|Voltage Rating||10 - 30 Volt|
|Standards||cULus Listed, cCSAus Certified, CCC Certified, EN/IEC 60947-5-2:2007, CE Compliant|
|Temperature Rating||-25 to 70 deg C Ambient|