>=3 Milli-Amp Measuring plate not detected, <=1 Milli-Amp Measuring plate detected current consumption
Pepperl & Fuchs Inductive sensor has NAMUR switching element with NC function. It is rated to operate at a distance of 4 mm with an assured operating distance of 0 - 3.24 mm. The housing is made of stainless steel and sensing face is made of PBT material for high strength with durability. Sensor operates at a voltage of 5 - 25 Volts and consumes a current of 3 milli-Amps at a switching frequency of 0 - 1500 Hz. It has reduction factor of 0.4 for aluminum, 0.3 for copper and 0.85 for 304 material.
Sensor has non-flush installation and operates at a temperature of -25 to 100 deg C. Sensor has four-pin M12 connector. Inductive sensor is IP67 rated for use in hazardous locations. Sensor is cULus/cCSAus listed and is CCC certified.
|Ships Ground. Eligible for expedited shipping||Yes|
|Material||1.4305/AISI 303 Stainless Steel Housing, PBT Face, PVC Cable|
|Degree Of Protection||IP67|
|Connection||2 m Cable|
|Brand Name||Pepperl & Fuchs|
|Size||M12 x 1 Thread, 33 mm Length|
|Sensing Distance||4 mm|
|Amperage Rating||>=3 Milli-Amp, <=1 Milli-Amp|
|Frequency Response||0 - 1500 Hz|
|Voltage Rating||5 - 25 Volt|
|Standards||cULus Listed, cCSAus Certified, CCC Certified, NAMUR: IEC 60947-5-6:1999 and EN 60947-5-6:2000, Standards: IEC/EN 60947-5-2:2007, CE Compliant, FM Approved|
|Temperature Rating||-25 to 100 deg C Ambient|