II Surge voltage category
Resistance: /=100 mega-ohm Insulation
Phoenix Contact 4-Position Sensor/actuator connector features nickel-plated zinc die-cast knurls for added strength and durability. It has flush-type socket offering M12-SPEEDCON connection. It has current rating of 4 Amps and voltage rating of 250 Volts. Connector features CuZn contact with Ni/Au surface that offers less than 3 milli-Ohm contact resistance and more than 100 Mega-Ohm insulation. A-coded connector features 0.5 m TPE litz wire and is front/screw mountable with M16 threading. It has torque rating of 3 - 4 Nm. Connector features FKM sealing to avoid danger of contamination while it is unlocked.
Connector lies under surge voltage category II and operates with less than 100 insertion/withdrawal cycles. It has black, brown, blue, white, gray wires that offer M12-SPEEDCON individual wire connection method. Connector has conductor of cross section 0.34 sq.mm with resistance of less than 57.6 milli-Ohm/m. It operates in ambient temperature range of -40 to 85 deg C for fixed cable installation and in -25 to 85 deg C for flexible cable installation. Connector comes under IP67 rated degree of protection. It has inflammability rating of UL 94-V0 to withstand harsh environmental conditions. Connector is UL listed and meets M12 connector IEC 61076-2-101 standards/regulations.
|Ships Ground. Eligible for expedited shipping||Yes|
|Mounting||Front Mount With M16 x 1.5 Thread|
|Environmental Conditions||Pollution Degree: 3|
|Cord Type||0.5 m, Tin Plated Copper Litz|
|Degree Of Protection||IP67|
|Number Of Poles||4 Position|
|Amperage Rating||4 Amp|
|Type||Flush, Universal Signal|
|Wire Size||22 AWG|
|Voltage Rating||250 Volt|
|Temperature Rating||-25 to 85 deg C (Plug/Socket)|
|Torque Range||3 - 4 N-m (Installation-Side)|