For fast coding with plastic profile
PE connection using tension sleeve technology
Plug-in connections may only be operated only when there is no load/voltage
Phoenix Heavycon® B16 Male insert has 16+PE number of positions. It can be screw connected. Insert has a tightening torque of 0.5 - 0.8 N-m. It has a current rating of 16 Amps and voltage rating of 500 Volts. It features conductor cross connection of 0.5 - 2.5 sq.mm. It has surge voltage rating of 6 kilo-Volts under category III. Insert has flammability rating of UL94 V-0 to withstand harsh environmental conditions.
Insert comes under IP20 deg pollution. Stripping length of the individual wire is 8 mm. Insert has insertion/withdrawal cycles greater than or equal to 500. It has 20 - 14 AWG connection cross section to offer good conductivity. It has PA contact carrier, silver surface and copper alloyed contacts. It operates at temperature of -40 to 125 deg C. It conforms to IEC/EN standards.
|Ships Ground. Eligible for expedited shipping||Yes|
|Environmental Conditions||Inflammability Class According To UL 94:V0|
|Number Of Positions/Contacts||16+PE|
|Application||For Heavycon Advance And Heavycon Housing Of B16 Type|
|Amperage Rating||16 Amp|
|Wire Size||20-14 AWG|
|Voltage Rating||500 Volt|
|Temperature Rating||-40 to 125 deg C|