Easy and safe 100% electrically tested plug-in components
Convenient increased machine availability, thanks to quick and easy diagnostics
Unwired protective circuit/component
50 mm stripping length of the free conductor end
Phoenix 4-Position Three LED sensor/actuator cable in RAL 7021 black/gray color is connected to 0.4 Nm torque M12 angled socket at one end and leaves free end at other side. It is 5 m long and is made of halogen free PUR for high-resilience/flexibility. It has chemical resistant NBR sealing and highly inflammable, self-extinguishing grip body for safer operation. Cable has Ni/Au contact surface and CuSn contact for providing better connectivity. It uses die-cast zinc connector and nickel plated knurls for connecting cable end with socket. Cable accommodates four copper conductors of cross section 0.34 mm.sq within 0.21 mm thick brown, white, blue, black color polypropylene insulation for conductivity.
Cable has 0.8 mm thick and 4.7 mm external diameter sheath with a bending radius of 5D in fixed installation, 10D in flexible installation. It has insulation resistance greater than or equal to 1 giga Ohm for a kilometer and conductor resistance lesser than or equal to 58 Ohms per kilometer. Cable is rated for voltage of 250 Volts, nominal voltage of 300 Volts, nominal current of 4 Amps and test voltage of 3000 Volts. It is rated for pollution degree of 3 and is a category lll surge protection device.
Cable operates within a temperature range of -40 to 80 deg C in fixed installation and -25 to 80 deg C in flexible installation. It is highly resistant to acids, alkaline solutions, solvents, hydrolysis and microbe. It is UV and abrasion resistant for use in harsh outdoor environmental condition. It is IP65/67/68 rated for maximum degree of protection and is eClass, ETIM, UNSPSC classified. Cable is UL listed.
|Ships Ground. Eligible for expedited shipping||Yes|
|Material||Halogen Free Polyurethane|
|Environmental Conditions||Inflammability Rated HB/UL94, Pollution Degree: 3|
|Conductor Size||22 AWG|
|Connection||M12 Angled Socket x Cable End|
|Conductor Material||Bare Copper Litz|
|Degree Of Protection||IP65, IP67, IP68|
|Color||Black, RAL 7021 Gray|
|Operating Temperature||-25 to 90 deg C (Plug/Socket)|
|Number Of Positions||4|
|Resistance||/=100 mega-ohm Insulation|
|Amperage Rating||4 Amp|
|Voltage Rating||24 Volt|
|Torque Range||0.4 N-m (M12 Connector)|