Dimension: 45 mm Width x 114 mm Depth x 130 mm Height
Optional CIFS integrity monitoring
MD5, SHA-1 Data integrity
Phoenix RS4000 FL TX/TX router features intelligent stateful inspection firewall with full scope of functions to provide protection for secured network connections. Firewall provides extremely easy configuration for quick start-up, updates and simple exchange. MGuard operating supports 42 Mbps and 27 Mbps router/stealth mode bi directional ten VPN/CIFS tunnelson the basis of the open Internet standard IPsec. Central management tool controls the hundreds of firewalls. It measures 45 mm x 114 mm x 130 mm. It features security appliance in metal housing for added durability. Extended temperature range supported by the router allows it to be deployed in locations with minimum environmental control. It incorporates SD card slot. It is provided with NAT/1:1-NAT routing that dynamically maps all the private addresses used on your trusted network onto a single public IP address assigned to your firewall's external interface.
Router operates at a temperature of - 20 to 60 deg C and has storage/transport temperature of - 20 to 70 deg C at 5% - 95% non-condensing humidity. It is provided with NAT/1:1-NAT routing that dynamically maps all the private addresses used on your trusted network onto a single public IP address assigned to your firewall's external interface. It has signal LEDs for supply voltage, data transmission, error, link, activity. Router with two twisted pair RJ45 port supports 10/100 MB/s Ethernet connectivity. It supports HTTPS browser and 300 MHz processor. It allows to encrypt through DES, 3DES, AES-128, -192, -256. It features Ethernet, potential-free signaling contact, VPN release button interface to provide network connectivity.
Router is LLDP polling enabled as per protocol 802.2 and periodically checks for local configuration changes. Remote syslog protocol sends messages to an external server for storing. It has a voltage rating of 24 VDC and current rating of 100 milli-Amps. It has a residual ripple of 3.6 Volts within the permitted voltage range. It provides protection against IP spoofing, DoS and Syn Flood by filtering MAC and IP addresses, ports, protocols. It is designed for cables with a maximum twisted pair conductor length of 100 m. It comes equipped with IP20 degree of protection for added safety. AX routers run on a standalone server. It is DIN rail mounted for easy installation.
|Ships Ground. Eligible for expedited shipping||Yes|
|Connection||Ethernet: RJ45, Potential-Free Signaling Contact: Plug-In/Screw Connection Via COMBICON|
|Degree Of Protection||IP20|
|Environmental Conditions||-20 to 70 deg C Storage/Transport Temperature, 5 - 95% Non-Condensing Humidity, En 61000-6-2:2005 Noise Immunity|
|Indicator||LED: P1, P2, Fault, State, Error, LAN, WAN|
|Interface||Ethernet, Potential-Free Signaling Contact, VPN - Release Button|
|Number Of Ports||2|
|Select Code||MOTOR CONTROL|
|Temperature Rating||-20 to 60 deg C|
|Transmission Length||Ethernet: 100 m (Per Segment)|
|Transmission Speed||Ethernet: 10/100 Mbps|
|Voltage Rating||24 Volt|