The front adapters are pushed into the high 1756-TBE hoods
Maximum 1 x 32 channels can be connected
Phoenix VARIOFACE Front adapter has a nominal voltage rating of 60 VDC and less than 50 VAC to make it operate efficiently. Adapter has a maximum permissible current rating of 1 Amp per path and 8 Amps per connection that are supplied via separate power supplies. It operates at an ambient temperature of -20 to 50 deg C. Adapter accommodates solid/stranded conductor cross-section range of 0.14 - 1.5 sq.mm and conductor cross-section range of 28 - 16 AWG.
Adapter supports Allen Bradley control logix and Honeywell PlantScape controllers. It has one connector and is connected using pluggable screw connection to hold appropriately. It features 50 positions and uses 2.54 mm IDC/FLK pin strip as connector. Adapter is stored and transported at an ambient temperature of -20 to 70 deg C. It operates under pollution degree 2 and surge voltage category II. Adapter meets IEC 60664, din EN 50178 and IEC 62103 standards.
|Ships Ground. Eligible for expedited shipping||Yes|
|Number Of Positions/Contacts||50 Position|
|Standards||UL, cUL And cUSUL Listed, IEC 60664, DIN EN 50178, IEC 62103|
|Temperature Rating||-20 to 50 deg C|
|Voltage Rating||<50 Volt AC, 60 Volt DC Nominal|
|Connection||Pluggable Screw, IDC/FLK Pin Strip (2.54 mm) Connector|
|Conductor Range||28-16 AWG Solid/Stranded|
|Environmental Conditions||-20 to 70 deg C Storage Temperature|
|Application||For Allen Bradley ControlLogix (1756-IA16I I/O Card) and Honeywell PlantScape (TC-IDJ 161 I/O Card)|
|Amperage Rating||1 Amp Per Path|