Size: 63.5 mm Length x 6.2 mm Width
DIN EN 50274 (VDE 0660-514):2002-11 Shock protection test specification
Phoenix 4-Pole Feed-thru terminal block in gray color is made of polyamide for durability. It measures 63.5 mm x 6.2 mm. It has two connection points on each side to accommodate many conductors and double bridge shaft to enable individual potential distribution as well as supply. It has 1.89 kilo-Volts power frequency to withstand certain voltage setpoint. Block can accommodate solid conductor of size 24 - 10 AWG/stranded conductor of size 24 - 12 AWG and has 8 mm long strip wire.
Block has a surge voltage of 8 kilo-Volts, tightening torque of 0.5 - 0.6 Nm, pin spacing of 6.2 mm, current rating of 32 Amps and voltage rating of 630 Volts. Block can be DIN rail mounted and has M3 screw type connection. It has a load rating of 32 Amps with conductor cross section 6 sq.mm. Block meets IEC 60947-7-1 standards and inflammability rated at UL 94 V2.
|Ships Ground. Eligible for expedited shipping||Yes|
|Item||Feed-Through Terminal Block|
|Load Rating||32 Amp (With 6 Sq mm Conductor Cross Section)|
|Conductor Range||24-10 AWG Solid, 24-12 AWG Stranded|
|Environmental Conditions||Inflammability Rated UL94 V-2, Pollution Degree: 3|
|Number Of Terminals||1 Level|
|Number Of Positions/Contacts||1 Position, 4 Connection|
|Number Of Poles||4|
|Size||63.5 mm Length x 6.2 mm Width|
|Amperage Rating||32 Amp (Lower Level)|
|Voltage Rating||630 Volt|
|Wire Strip Length||8 mm|