Size: 17.7 mm Width x 52 mm Depth x 45 mm Height
Plugs can be checked with CHECKMASTER
Maximum ease of maintenance thanks to the two-piece design
Base element remains an integral part of the installation
Protective devices for use in telecommunications and signaling networks according to IEC 61643-21
Impedance-neutral disconnection of plug for test and maintenance purposes
Installed in conjunction with the PT 4x1...-BE base element
With protective circuit
Phoenix Surge protection plug in black color provides protection against high voltage by automatically grounding four conductors of single circuit. Plug operates at a nominal voltage of 24 VDC and nominal current of 300 milli-Amps at 45 deg C. It works at ambient temperature of -40 to 85 deg C. It uses maximum continuous operating voltage and wire-ground continuous voltage of 28 VDC. Plug makes use of effective operating current of less than or equal to 5 micro-Amps and residual current of less than or equal to 1 micro-Amp/20 micro-Amps when directly grounded. It has core-core nominal discharge current of 5 kilo-Amps and core-earth nominal discharge current of 5 kilo-Amps. Plug has strip length of 8 mm and total surge current of 10 kilo-Amps.
Plug features core-earth nominal pulse current of 30 Amps. It has impulse discharge peak current of 2.5 kilo-Amps. It has core-earth output spike voltage limitation at 1 kilo-Volt/micro-second and offers a value of less than or equal to 45 Volts. It has core-earth output static voltage limitation at 1 kilo-Volt/micro-second and offers a value of less than or equal to 40 Volts. It features symmetric input attenuation of 0.5 dB. Plug has core-earth response time of less than or equal to 1 nano-second. It requires maximum back-up fuse of 315 milli-Amps. Plug is IEC test classified as C1, C2, C3 and D1. It has C2 core-earth voltage protection level of 10 kilo-Volt. It can withstand core-core capacity of less than or equal to to 1.4 nF and has resistance of 4.7 Ohm per path.
Plug has core-earth C1 and D1 surge carrying capacities in accordance with IEC 61643-21. It features tightening torque of 0.8 N-m and conductor of cross section 24 - 12 AWG/kcmil. Stranded conductor cross section measures 0.2 - 2.5 sq.mm and solid conductor of cross section measures 0.2 - 4 sq.mm. It measures 17.7 mm x 52 mm x 45 mm and offers IP20 deg of protection for safety. PLUGTRAB plug-in system is provided for fast and quick mounting. Plug meets IEC 60664-1 air and VDE 0110-1 creepage distances standards. It conforms to IEC 61643-21/EN 61643-21 regulations and is UL listed.
|Ships Ground. Eligible for expedited shipping||Yes|
|Item||Surge Protection Plug|
|Mounting||DIN-Rail/On Base Element|
|Degree Of Protection||IP20|
|Environmental Conditions||Inflammability Rated UL94 V|
|Response Time||(Core-Earth) = 1 ns|
|Size||17.7 mm Width x 52 mm Depth x 45 mm Height|
|Amperage Rating||300 Milli-Amp|
|Application||For 4 Conductors Of Signal Circuits Grounded On One Side|
|Voltage Rating||24 Volt DC Nominal, 28 Volt DC Maximum|
|Standards||Standards For Air And Creepage Distances:VDE 0110-1:IEC 60664-1|
|Temperature Rating||-40 to 85 deg C|
|Surge Protective Current||20 Kilo-Amp|