Dimension: 115 mm Length x 152.5 mm Width x 130 mm Height
Use the third negative terminal block as a grounding terminal block and minimize installation costs
Phoenix 3-Phase TRIO-PS/ 3AC/24DC/20 Primary-switched mode power supply unit is a reliable device that has more than 500000 hours of MTBF. It has a high dielectric strength of 300 VAC and has inrush surge current rated at 15 Amps. Voltage drops can be compensated using the output voltage that can be adjusted in front. It measures 115 mm x 152.5 mm x 130 mm and has horizontal/NS 35 DIN rail mount. It is an ideal varistor protection circuit that offers transient surge protection and has control deviation greater than 0.1/1/2%. It has output voltage rating of 24 VDC and current rating of 20 Amps.
Parallel/series connected unit features an LED indicator and has 9 mm stripping length, M2.5 threaded screw for input and 14 mm stripping length for output. Unit consumes current rated at 3 x 1.1 Amps at 400 VAC and 3 x 0.8 Amps at 480 VAC. Unit dissipates maximum power of greater than 6 Watts at no-load and greater than 48 Watts at nominal load.
|Ships Ground. Eligible for expedited shipping||Yes|
|Mounting||NS 35 DIN-Rail/Horizontal|
|Item||Power Supply Unit|
|Environmental Conditions||95% Non-Condensing Relative Humidity (At 25 deg C)|
|Degree Of Protection||IP20|
|Secondary Voltage||24 Volt DC|
|Primary Voltage||3 x (320 - 575) Volt AC|
|Size||115 mm Length x 152.5 mm Width x 130 mm Height|
|Amperage Rating||20 Amp|
|Frequency Rating||45 - 65 Hz|
|Temperature Rating||-25 to 70 deg C|
|Standards||cULus Listed, RoHS Compliant|