Phoenix Contact Phoenix 2938646 Quint-PS Industrial Power Supply; 400 - 500 AC Volt Input/24 Volt DC Output, 40 Amp, 960 Watt, DIN Rail Mounting, 3 Phase

*Images are representative of products listed and may not be actual product.
  • Phoenix Contact 2938646 Phoenix Contact Phoenix 2938646 Quint-PS Industrial Power Supply; 400 - 500 AC Volt Input/24 Volt DC Output, 40 Amp, 960 Watt, DIN Rail Mounting, 3 Phase
Manufacturer: Phoenix Contact
Catalog#: 2938646
Crescent Part#: 98635
UPC: 012596000005
Your Price:

Product Details

Dimension: 125 mm x 240 mm x 130 mm

Product Details:

Phoenix Quint-PS Industrial Power Supply has input voltage rating of 3 x 320 - 575 VAC and 450 - 800 VDC. It has AC operating frequency of 45 - 65 Hz at the input. Power supply unit consumes 3 x 2.8 Amps of current at 400 VAC and 3 x 2.2 Amps at 480 VAC. DIN rail power supply unit consumes nominal power of 960 Watts. It has inrush surge current that is less than 15 Amps. Unit has power failure bypass of greater than 20 milli-seconds at 400/480 VAC. The three-Phase power supply unit has green LED indicator to display the operating voltage with efficiency greater than 91% for 230 VAC. It has input/output insulation voltage of 2 kilo-Volt for routine test and 4 kilo-Volt for type test. It features varistor protective circuit/component and transient type surge protection.Power supply unit has nominal output voltage of 24 VDC +/- 1% and output voltage of 22.5 - 28.5 VDC. It has output current of 40 Amps up to -25 to 70 deg C and 45 Amps with power boost. Primary-switched mode power supply unit has peak-to-peak residual ripple voltage of less than 10 milli-Volts. It has peak-to-peak switching voltage of less than 60 milli-Volts for nominal load at 20 MHz. Unit has maximum power dissipation of less than 14 Watts for NO-load and nominal power loss of less than 80 Watts for maximum load. It can be connected in parallel/serially at the output. It has current limitation of 45 Amps at the event of short-circuit. It has control deviation of less than 1%/2% for change in load at 10% - 90% static/dynamic and less than 0.1% for change in input voltage at +/-10%. It has 95% maximum permissible relative humidity. It has MTBF of greater than 500000 hrs. It measures 125 mm x 240 mm x 130 mm. Power supply unit has a solid conductor cross section of 0.2 - 6 sq.mm and stranded conductor cross section of 0.2 - 4 sq.mm at the input. It has conductor cross section of 24 - 10 AWG at the input. It has a M3 type screw thread at the input. It has solid conductor cross section of 0.5 - 16 sq.mm and stranded conductor cross section of 0.5 - 10 sq.mm at the output. It has conductor cross section of 20 - 6 AWG at the output. It has a stripping length of 8 mm at the input and 10 mm at the output. It displays DC OK in active state with green LED indication when output is greater than 0.9 times Un with high signal. It has maximum switching voltage that is less than or equal to 24 Volts and output voltage of 24 VDC. It has maximum inrush current and continuous load current that is less than or equal to 40 milli-Amps during active state. It has a tightening torque of 1.2 - 1.5 N-m.Power supply unit conformance with electromagnetic compatibility directive 89/336/EC. It displays DC OK in floating state with green LED indication when relay contact output is greater than 0.9 times Un with closed contact. It has maximum switching voltage that is less than or equal to 30 VAC/VDC. It has maximum inrush current and continuous load current that is less than or equal to 1 Amp in floating state. Unit can be mounted horizontally through DIN rail NS 35. It has IP20 deg of protection. It operates at an ambient operation temperature of -25 to 70 deg C. It operates at an ambient storage/transport temperature of -40 to 85 deg C. Power supply unit meets EC 61709, SN 29500, EN 50081-2/61558-2-17/60950-1 (SELV)/61000-3-2, DIN VDE 0106-101, CB Scheme, GS tested for safety, UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D for hazardous location.

Product Specification

Product Details
Manufacturer Phoenix Contact
Catalog# 2938646
Shipping Information
Ships Ground. Eligible for expedited shipping Yes
Other Information
Mounting DIN-Rail
Item Power Supply
Efficiency 91%
Phase 3
Power Rating 0
Size 125 mm x 240 mm x 130 mm
Brand Name Phoenix
Amperage Rating 40 Amp
Frequency Rating 45 - 65 Hz
Voltage Rating 400 - 500 AC Volt Input, 24 Volt DC Output
Type Industrial
Standards UL 508, UL 60950, UL 1604 Class I, Division 2, Groups A, B, C, D
Temperature Rating 70 to 25 deg C
Sub Brand Quint-PS

Customer Questions & Answers

Ask your questions, share your answers.
We respect your privacy. Specify email and we will send the answer to your address. We never reveal your information or use it to send you not related email.
Write a Review

Review /

Customer Reviews
This product is not rated. Click here to rate this product!

Login for Availability

Phoenix Contact