Size: 6.2 mm Width x 94 mm Depth x 80 mm Height
Time savings of up to 60 %
No need for additional modular terminal blocks
Efficient connection to system cabling using V8 adapter
Relay modules with safe isolation according to DIN EN 50178 between coil and contact
Space savings of up to 80 %
Sensor connected directly to relay module
Functional plug-in bridges
Phoenix® Sensor relay module features M3 screw thread and a yellow LED for indication. Module has nominal input voltage rating of 120 VAC/110 VDC and current rating of 3.5 milli-Amps. It has typical response time of six milli-seconds and release time of 15 milli-seconds. Module features bridge rectifier protective circuit for added safety.
Module has one N/O contact type and contact side made of hard gold-plated AgSnO material for durability. It has maximum switching voltage of 30 VAC/36 VDC and minimum switching voltage of 100 milli-Volts at 10 milli-Amps. It has maximum inrush current of 50 milli-Amps and minimum switching current of 1 milli-Amp at 24 Volts. Module operates at a temperature of -40 to 60 deg C. It has 1 Watt of maximum interrupt rating at 24 VDC and 50 milli-Amps of limiting continuous current to perform efficiently.
Module allows conductor of cross section 26 - 14 AWG and solid/stranded conductor of cross section 0.14 - 2.5 sq.mm. It has 100% operating factor and 4 kVAC of test voltage for relay winding/relay contact at 50 Hz, one minute. It has 2 x 10ˆ7 cycles of mechanical service life and is stored/transported at ambient temperature -40 to 85 deg C.
Module measures 6.2 mm x 94 mm x 80 mm and has strip length of 8 mm. It can be mounted in any position using DIN rails and is ideal for commercial or industrial applications. It works under pollution degree 3 and surge voltage category III. It has UL 94 V0 inflammability rating to withstand harsh environmental conditions. Module conforms to IEC/EN standards.
|Ships Ground. Eligible for expedited shipping||Yes|
|Item||PLC Relay Module|
|Dimension||6.2 mm Width x 94 mm Depth x 80 mm Height|
|Environmental Conditions||Pollution Degree: 3|
|Conductor Size||26-14 AWG|
|Contact Rating||50 Milli-Amp Maximum Inrush Current, 1 Milli-Amp at 24 Volt Minimum Switching Current, 100 Milli-Volt at 10 Milli-Amp Minimum Switching Voltage, 30 Volt AC/36 Volt DC Maximum Switching Voltage, 6 Amp Limiting Continuous Current|
|Contact Material||AgSnO Hard Gold-Plated|
|Coil Rating||3.5 Milli-Amp at 120 Volt AC, 110 Volt DC|
|Power Rating||140 Watt|
|Release Time||15 ms|
|Response Time||6 ms|
|Amperage Rating||6 Amp Limiting Continuous, 100 Milli-Amp Switch|
|Frequency Rating||50 Hz Input|
|Temperature Rating||-40 to 60 deg C|
|Standards||IEC 60664, EN 50178, IEC 62103|