Size: 6.2 mm Width x 94 mm Depth x 80 mm Height
Efficient connection to system cabling using V8 adapter
RT III sealed solid-state relay
Functional plug-in bridges
Integrated input circuit
Zero voltage switch at AC output
High switching power
Phoenix® Interface solid-state relay module features M3 screw thread to hold firmly and a yellow LED for indication. Relay has nominal input voltage rating of 120 VAC/110 VDC and current rating of 3.5 milli-Amps. It has voltage of less than or equal to 0.3 Volt at switching threshold "0" signal and greater than or equal to 0.9 Volt at switching threshold "1" signal. It operates at transmission frequency of 10 Hz and input voltage range of 0.9 - 1.1 Volts. It has typical response time of three milli-seconds and turn-off time of four milli-seconds.
Relay features bridge rectifier circuit to offer extra protection. It has output voltage range of 3 - 48 VDC and 100 milli-Amps of limiting continuous current. It has voltage drop of less than or equal to 1 Volt at limiting continuous current. It operates at ambient temperature of -25 to 60 deg C. Module has 2-Wire, floating output circuit to provide surge protection and to safeguard against polarity reversal.
Relay has 100% operating factor and 2.5 kilo-Volts of input/output test voltage at 50 Hz, one minute. It allows conductor of cross section 26 - 14 AWG/kcmil and solid/stranded conductors of cross section 0.14 - 2.5 sq.mm. It features reliable basic insulation for added protection. It is stored/transported at ambient temperature of -25 to 70 deg C.
Relay measures 6.2 mm x 94 mm x 80 mm and has strip length of 8 mm. It works under pollution degree 2 and surge voltage category III. It has UL 94 V0 inflammability rating to withstand harsh environmental conditions. It can be mounted in any position using DIN rails and is ideal for commercial or industrial applications. Relay conforms to IEC/EN standards.
|Ships Ground. Eligible for expedited shipping||Yes|
|Item||PLC Interface Relay Module|
|Environmental Conditions||Pollution Degree: 2|
|Dimension||6.2 mm Width x 94 mm Depth x 80 mm Height|
|Conductor Size||26-14 AWG|
|Release Time||4 ms|
|Response Time||3 ms|
|Amperage Rating||3.5 Milli-Amp Input, 100 Milli-Amp Output|
|Frequency Rating||50 Hz Input, 10 Hz Transmission|
|Voltage Rating||120 Volt AC/110 Volt DC Input, 3 - 48 Volt DC Output|
|Standards||IEC 60664, EN 50178, IEC 62103|
|Temperature Rating||-25 to 60 deg C|