Size: 6.2 mm Width x 94 mm Depth x 80 mm Height
Efficient connection to system cabling using V8 adapter
RT III sealed relay
Safe isolation according to DIN EN 50178 between coil and contact
Functional plug-in bridges
Integrated input circuit and interference suppression circuit
consisting of base terminal block PLC-BSC.../21
Phoenix® Relay module features M3 screw thread and a yellow LED for indication. Module has nominal input voltage rating of 12 VDC and coil current rating of 15.3 milli-Amps. It has typical response time of five milli-seconds and release time of eight milli-seconds. Module features a protective circuit that has freewheeling damping diode to offer protection against polarity reversal.
Module has SPDT contact type and contact side made of AgSnO material for durability. It has maximum switching voltage of 250 VAC/VDC and minimum switching voltage of 5 Volts at 100 milli-Amps. It can get required maximum inrush current on request and minimum switching current of 10 milli-Amps at 12 Volts. Module has 6 Amps of limiting continuous current to perform efficiently.
Module has maximum interrupt rating of 140 Watts at 24 VDC, 20 Watts at 48 VDC, 23 Watts at 110 VDC and 18 Watts at 60 VDC. It has 40 Watts of interrupt rating at 220 VDC and 1500 VA for 250 VAC. Module has switching capacity of 2 Amps at 24 Volts, 0.2 Amps at 110 Volts, 0.1 Amps at 220 Volts and 3 Amps at 24/120/230 Volts. It requires a separate PLC-ATP plate for voltages larger than 250 Volts.
Module allows conductor of cross section 26 - 14 AWG and solid/stranded conductors of cross section 0.14 - 2.5 sq.mm. It has 100% operating factor and 4 kVAC of test voltage for relay winding/relay contact at 50 Hz, one minute. It has 2 x 10ˆ7 cycles of mechanical service life and is stored/transported at ambient temperature -40 to 85 deg C.
Module measures 6.2 mm x 94 mm x 80 mm and has strip length of 8 mm. It can be mounted in any position using DIN rails and is ideal for commercial or industrial applications. It works under pollution degree 3 and surge voltage category III. It has UL 94 V0 inflammability rating to withstand harsh environmental conditions. Module conforms to IEC/EN standards.
|Ships Ground. Eligible for expedited shipping||Yes|
|Item||PLC Relay Module|
|Dimension||6.2 mm Width x 94 mm Depth x 80 mm Height|
|Contact Rating||10 Milli-Amp at 12 Volt Minimum Switching Current, 5 Volt at 100 Milli-Amp Minimum Switching Voltage, 250 Volt AC/DC Maximum Switching Voltage, 6 Amp Limiting Continuous Current|
|Conductor Size||26-14 AWG|
|Environmental Conditions||Pollution Degree: 3|
|Coil Rating||15.3 Milli-Amp at 12 Volt DC|
|Power Rating||140 Watt|
|Number Of Poles||1|
|Response Time||5 ms|
|Release Time||8 ms|
|Amperage Rating||6 Amp Limiting Continuous, 10 Milli-Amp Switch|
|Frequency Rating||50 Hz Input|
|Temperature Rating||-40 to 60 deg C|
|Standards||IEC 60664, EN 50178, IEC 62103|