Size: 6.2 mm Width x 94 mm Depth x 80 mm Height
Efficient connection to system cabling using V8 adapter
RT III sealed solid-state relay
High switching power
Zero voltage switch at AC output
Integrated input circuit
Functional plug-in bridges
Phoenix® Interface solid-state relay module features spring cage connection to hold firmly and a yellow LED for indication. Relay has nominal input voltage rating of 24 VDC and current rating of 9 milli-Amps. It has voltage of less than or equal to 0.4 Volt at switching threshold "0" signal and greater than or equal to 0.8 Volt at switching threshold "1" signal. It operates at transmission frequency of 300 Hz and input voltage range of 0.8 - 1.2 Volts. It has typical response time of 20 μs and turn-off time of 300 μs.
Relay features freewheeling damping diode circuit to offer protection against polarity reversal. It has output voltage range of 3 - 33 VDC and 3 Amps of limiting continuous current. It has maximum inrush current of 15 Amps at 10 milli-seconds. It has voltage drop of less than or equal to 200 milli-Volts at limiting continuous current. It operates at ambient temperature of -25 to 60 deg C.
Relay features two-wire, floating output circuit for surge protection and to safeguard against polarity reversal. It has 100% operating factor and 2.5 kilo-Volts of input/output test voltage at 50 Hz, one minute. It features conductor of cross section 26 - 14 AWG/kcmil and solid/stranded conductors of cross section 0.14 - 2.5 sq.mm. It features reliable basic insulation for added protection.
Relay measures 6.2 mm x 94 mm x 80 mm and has strip length of 8 mm. It works under pollution degree 2 and surge voltage category III. It is stored/transported at ambient temperature of -25 to 70 deg C. It has UL 94 V0 inflammability rating to withstand harsh environmental conditions. It can be mounted in any position using DIN rails and is ideal for commercial or industrial applications. Relay conforms to IEC/EN standards.
|Ships Ground. Eligible for expedited shipping||Yes|
|Item||PLC Interface Relay Module|
|Conductor Size||26-14 AWG|
|Environmental Conditions||Pollution Degree: 2|
|Dimension||6.2 mm Width x 94 mm Depth x 80 mm Height|
|Response Time||20 us|
|Release Time||300 us|
|Amperage Rating||9 Milli-Amp Input, 3 Amp Output|
|Frequency Rating||50 Hz Input, 300 Hz Transmission|
|Voltage Rating||24 Volt DC Input, 3 - 33 Volt DC Output|
|Temperature Rating||-25 to 60 deg C|